Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear tow point on Rangie?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 47
Joined: Tue Aug 12, 2003 9:17 pm
Location: Melbourne

Rear tow point on Rangie?

Post by Tony78rr »

Besides a tow bar, what are people using as a 'substantial' rear tow point?
Any ideas (Cheap ones!!!!)
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Custom rear bar
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Custom bar, recovery hooks mounted onto chassis....
Top
Posts: 207
Joined: Wed Dec 04, 2002 8:45 am
Location: Over there

Contact:
Contact Bodge

Post by Bodge »

Yeah custom as well....

Using big hefty U section that goes around the rear crossmember and picks up the 4 attachment points 2 in the middle [vertical] and 2 on the outside [horizontal]. Then have attached a pin reciever style tow point with 18mm grade 8 bolts and a 5mm steel backing plate...
The Lucas motto: "Get home before dark."
Top
Posts: 207
Joined: Wed Dec 04, 2002 8:45 am
Location: Over there

Contact:
Contact Bodge

Post by Bodge »

Oh yeah - its not pretty but it is overbuilt :D
The Lucas motto: "Get home before dark."
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Its pretty important to have decent recovery hooks on the back of the Rangie coz i keep having to pull other people through :D
Top
Posts: 14
Joined: Sun Dec 22, 2002 4:16 pm
Location: Auburn California USA

Post by JSBriggs »

Anyone consider an American style receiver hitch? I guess Im lucky the the NAS RR's Disco's and Defenders come from the factory with them.

Image

This enables you to either mount a ball hitch for towing or various recovery gear including a winch.

Image

Image


-Jeff
All it needs is just a little luvin'
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

jeff, i don't know if thats an american invention??
every 4wd in aust. has a receiver like that. but they do detract from ultimate ground clearance.
Top
Posts: 207
Joined: Wed Dec 04, 2002 8:45 am
Location: Over there

Contact:
Contact Bodge

Post by Bodge »

Whats the shear strength of that one pin??

Nissan's weigh a lot man.... :D
The Lucas motto: "Get home before dark."
Top
Posts: 14
Joined: Sun Dec 22, 2002 4:16 pm
Location: Auburn California USA

Post by JSBriggs »

modman wrote:jeff, i don't know if thats an american invention??
every 4wd in aust. has a receiver like that. but they do detract from ultimate ground clearance.


I only say American because they came standard on NAS trucks....

-Jeff
All it needs is just a little luvin'
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

if you put a pin with grade 12 rating (bolt) about 12mm it can be 26 tonne!
Top
Posts: 553
Joined: Fri Sep 26, 2003 7:54 am
Location: Sydney,Narrabeen

Contact:
Contact Britswed

Post by Britswed »

Custom rear bar
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

pin I believe in double shear is about 28 tonnes. (using a square hitch)

Bazzle
Top
Posts: 207
Joined: Wed Dec 04, 2002 8:45 am
Location: Over there

Contact:
Contact Bodge

Post by Bodge »

bazzle wrote:pin I believe in double shear is about 28 tonnes. (using a square hitch)

Bazzle


Should be enough :D
Even a Nissan can't weigh that much....
The Lucas motto: "Get home before dark."
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

i don't know?? they need a lot of fuel!!!
Top
Posts: 13
Joined: Wed Oct 15, 2003 1:57 am
Location: Devon - England

Post by David Lovejoy »

Why not just fit two Jate rings and run a bridle between? :D
Smile - and make the world wonder why!
Top
Posts: 207
Joined: Wed Dec 04, 2002 8:45 am
Location: Over there

Contact:
Contact Bodge

Post by Bodge »

I had Jate rings and never had a problem - but they are not 'legal' for competition events or for non-Landrover club trips which specify mounting by two rated points to the chassis...

AND I gotta say its easier with the hooks - no more standing in the mud up to my crotch dorking around with two shackles... and no metal attached to the end of your stretchy sling shot recovery rope...
The Lucas motto: "Get home before dark."
Top
Posts: 13
Joined: Wed Oct 15, 2003 1:57 am
Location: Devon - England

Post by David Lovejoy »

Fairynuff...

It's a strange world we live in!

Genuine Jate rings are loaded to 14,000lbs - more than enough to tear the chassis...

ideal for a Rangey but not for all other makes of 4x4...

I used to like a welded loop from the end of either chassis rail supported by a butterfly plate - stronger than a bolt in any form, then the Motor Sport Assoc said "No"... Ridiculous, still such is life.

Probably best to look at local club rules first then design the recovery point...

I'll stick with the Jates Rings - they have served me well so far!
Smile - and make the world wonder why!
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

jate rings look neat, but they're a pita in deep mud trying to get shackles around. i suppose you could leave a bridle permanently connected, hooked over the bullbar.
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

i had jate rings on my defender and they were great. just attach a bridle beforehand and then you dont even have to get out the car :D
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

landyman, what did you use for a bridle??
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

very short tree trunk protector with shackle in the middle
ideally you would want a really short snatch strap, but those are not available....
I have also seen nylon covered steel cable
but I am thinking about possibly some 10 or 12mm plasma rope would also do...
and you could tie the plasma to the bullbar while not using it ;)
Top
Posts: 13
Joined: Wed Oct 15, 2003 1:57 am
Location: Devon - England

Post by David Lovejoy »

A 14 tonne SWL short lifting strap about ten feet long is ideal - with a padded slip collet so you don't need an extra shackle...

Be careful it's not too short or you can pull in the chassis rails under high load... ;)
Smile - and make the world wonder why!
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

cheers landyman, good thought.
Top
Posts: 13
Joined: Wed Oct 15, 2003 1:57 am
Location: Devon - England

Post by David Lovejoy »

hmmm - *must check to see if writing invisible posts*
Smile - and make the world wonder why!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 35 guests