My Sierra, standard G13ba, has developed an engine rattle. From what I've read it could be the cracked/broken piston skirt issue but I'm not sure.
A. What else can cause a rattle
B. What the likely costs to repair this myself or get done by a shop.
How is the easiest way to determine if it is a broken skirt, I think I'll have to pull the sump off (not keen on doing this, replacing main seals etc etc).
Or do I just buy a replacement engine.
Yours in deepening debt
Greg.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine Problem
Re: Engine Problem
If you're not too comfortable taking the sump off for a look i'd suggest taking the car to a mechanic that you trust and ask them to diagnose.just cruizin' wrote:My Sierra, standard G13ba, has developed an engine rattle. From what I've read it could be the cracked/broken piston skirt issue but I'm not sure.
A. What else can cause a rattle
B. What the likely costs to repair this myself or get done by a shop.
How is the easiest way to determine if it is a broken skirt, I think I'll have to pull the sump off (not keen on doing this, replacing main seals etc etc).
Or do I just buy a replacement engine.
Yours in deepening debt
Greg.
Don't tell then that you think its a cracked skirt or they'll just tell you that your engine is stuffed so they can charge fr a new one.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
I just rebuilt my motor,cost $320 to bore 40 thou and new pistons,rings. Monotorque gasket set and new bearings,$240. 1 hour,45 minutes later new engine from fully dissasembled to rebuilt.Cheers paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
love some more info on this MART.. soudsn to good to be true! fingers crossed can get similar prices done down in melbourne!
Where did you go for the pistons and gaskets? did you change anything else while the donk was in bits?
Where did you go for the pistons and gaskets? did you change anything else while the donk was in bits?
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]
A few episodes before they can it? :lol:[/quote]
A few episodes before they can it? :lol:[/quote]
Who is online
Users browsing this forum: No registered users and 3 guests