Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NEED HELP ! SLIDERS FOR GU 02

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 98
Joined: Wed Aug 30, 2006 6:02 pm
Location: Hollywell/ Gold Coast

NEED HELP ! SLIDERS FOR GU 02

Post by rippin »

Wanting to make sliders for my GU 02 model. Wanting ideas pics anything that will help me. Not to sure how to go about mounting the sliders on the chassy either. Not wanting to weld or drill holes into chassy. Can any body help me. Post pics, anything to help. THANKS
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

http://www.outerlimits4x4.com/search.php
Top
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Contact:
Contact weeman

Post by weeman »

geez that helps..

I'm doing some sliders for my GU, you wont need to weld or drill anything to the chassis.

I'm going to be using ubolts to fix my to the chassis rail.

I'm going to use 3 support and going to have a flat top of checkerplate similar to the ARB side/rail step combination.

Hopefully will start on them in the next few weeks......
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

http://www.outerlimits4x4.com/viewtopic ... ht=sliders
http://www.outerlimits4x4.com/viewtopic ... ht=sliders
http://www.outerlimits4x4.com/viewtopic ... ht=sliders
http://www.outerlimits4x4.com/viewtopic ... ht=sliders
geez that helps..
funnily enough all these were found using this LINK, with plenty more there :finger: :finger: :finger: :D
Top
Posts: 98
Joined: Wed Aug 30, 2006 6:02 pm
Location: Hollywell/ Gold Coast

Post by rippin »

Thanks for the help guys. Got a few ideas going on now thanks hopefully have mine done in the next few weeks as well. Then starting on the rear bar for my GU. THANKS AGAIN
Top
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

i asked this also in general but i thought i could try my luck here also ;) with the U shape that goes around the chassis(like in the pics in the links above) basically its been said that you use 10mm thick rhs is this true and what do most of you guys do about fuel lines etc runnin on the inside of the chassis rails i assume they are moved abit to slide the mount up but what about them rubbing on it

cheers
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

put a spacer under the fixing that holds the fuel lines onto the chassis so they are fixed in place but spaced out. Dont space them too far though so they are in no-mans land. If they have to be spaced out too far then you could put a piece of angle under them for a bit of protection.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests