LONG FEILD CV's

[goannaoffroad]

Can some one please tell me who's selling the Longfeild cv's or if any one's got some they want to part withwhat is the cost?

[MitchellBros4x4]

Got some if you want them, new, $650 each. They suit 27 spline axles.

[MissDrew]

Jamie Way or just ring long`s direct and order them via credit card.

I bought 27 spliners and they only cost me $650 for the pair landed on my door step.

30 spliners with axles cost around $1100 or $1200 landed.

[jessie928]

dont ya love the internet

Jes

[bad_religion_au]

your 27 spliners are chromolly arent' they?

[MissDrew]

yes

[RUFF]

Jamie Way or just ring long`s direct and order them via credit card.

I bought 27 spliners and they only cost me $650 for the pair landed on my door step.

30 spliners with axles cost around $1100 or $1200 landed.

I can also varify you can land the 27Spline ones for $650 a pair and you can land the 30 Spline superset(CVs with Axles) for between $1000 and $1200 depending on how fast you want them.

If you want ultimate Strength go with the 30 spline ones.

And arder them from Terra direct. They have sent heaps of them over here now and wont have a problem selling to you. If your going to call them call at around 7AM EDST to get them on the phone.

www.toyotasuperaxles.com

[ausyota]

And arder them from Terra direct. They have sent heaps of them over here now and wont have a problem selling to you. If your going to call them call at around 7AM EDST to get them on the phone.

www.toyotasuperaxles.com

Longfield are very easy to deal with via Email too (link on thier site).
Great service.

[A1]

Yep can also varify the excellent service from Longfield enterprises......

Ordered my 30 spline super set had it here in OZ within 4 days .....better service than you get here in oz most of the time .....

Have also since got 2 pairs of the chromo drive flanges .....no issues and as Tony mentioned Terra is very easy to deal with

cost to my door was like $1107 total


http://www.longfieldsuperaxles.com/

Dan

[MissDrew]

If your going to call them call at around 7AM EDST to get them on the phone.

www.toyotasuperaxles.com

If you do ring and only get the answering machine leave a message as they DO!!!!!!!!!!!!!! ring back, yes even to us here in Aus. When I ordered mine I left my home number but then ended up going out before they rang back, my wife then gave them my mobile number and they then rang that So they eneded up doing 2 over seas phone calls for an order

[goannaoffroad]

Is $650-00 a pair for cv's and axle's or just cv's.

[RUFF]

Is $650-00 a pair for cv's and axle's or just cv's.

The $650 is for a pair of 27 Spline CV's only. No axles.

[JeepRecoveryTeam]

Tony,

Let me know if it makes sense to bring a care package over in January.

I would love to explain to Airport security why 5 sets of 30 Spliners should not be considered a weapon LOL

[Sic Lux]

Everything's a wepon just depends how you use it got mine direct very good to deal with beats buying one off snake for $650 or whatever they were last time i looked 100%mark up good for snake but why not go direct and spend that extra$ on other stuff

[mud80]

what spline are landcruiser 80 fronts? 27 or 30?
(petrol 4.5l manual)

[MissDrew]

Longfield do cv`s for 80 series

[goannaoffroad]

It's not the axle to diff' spline that's 30 it''s the axle to cv that is.All toyota's run 30 spline side gear's in the diff's.

[tuff-lux]

so would i be right in saying we would be better off if we waited and saved to get axles and hub gears aswell as cvs at once?

[RUFF]

so would i be right in saying we would be better off if we waited and saved to get axles and hub gears aswell as cvs at once?

Yes for ultimate strength you want the 30 spline superset. If you need to run Freewheeling hubs then get Hub Gears, Otherwise he does chromo drive flanges that will never fail.

The 27spline CVs are only as strong as the axle, Even the Chromo 27spline axles that are around are still weaker than this CV.

[RUFF]

Tony,

Let me know if it makes sense to bring a care package over in January.

I would love to explain to Airport security why 5 sets of 30 Spliners should not be considered a weapon LOL

Hey Dave i need a set for a FJ80

[Tiny]

Tony,

Let me know if it makes sense to bring a care package over in January.

I would love to explain to Airport security why 5 sets of 30 Spliners should not be considered a weapon LOL

Hey Dave i need a set for a FJ80

I need a set for a 70

[A1]

Tony,

Let me know if it makes sense to bring a care package over in January.

I would love to explain to Airport security why 5 sets of 30 Spliners should not be considered a weapon LOL

Hey Dave i need a set for a FJ80

I need a set for a 70

while everyones at it ....I need another set to convert the rear to a steer axle

[tuff-lux]

thanks ruff. 30 spline superset and hub gears its is then , just have to let the money tree recover it has copped a real hard pruning lately

[CV Smasher]

Ordered a set direct for an 80 2 weeks ago and received them 3 days later.
Longfield are by far the best supplier i have dealt with.

[Hekta]

Ordered a set direct for an 80 2 weeks ago and received them 3 days later.
Longfield are by far the best supplier i have dealt with.

You will have to change your username now

[Slunnie]

Yes for ultimate strength you want the 30 spline superset. If you need to run Freewheeling hubs then get Hub Gears, Otherwise he does chromo drive flanges that will never fail.

Are the chromo drive flanges a permanently locked hub in the same vein as the Maxi-drive hubs. I couldn't see these on the Longfield website though does anybody know what he charges for them and if they'll suit LC60 axles?

[goannaoffroad]

I'm not sure what Longfeild sell but genuine 80's drive flanges come in different spline lengths. The early 80's drive flange('90 to 93') can be fitted to any fine spline L/C or Hilux front wheel hub .The genuine Toyota
free wheeling hubs first came out on vehicles in 1980 before that every thing had drive flanges so Longfeild might do something for early L/C's which will fit 60's to.

[Slunnie]

Ahhh, thanks for this. Being a LR man I'd forgotten about full time LC's etc. Thanks for this.

[bazooked]

Yes for ultimate strength you want the 30 spline superset. If you need to run Freewheeling hubs then get Hub Gears, Otherwise he does chromo drive flanges that will never fail.

Are the chromo drive flanges a permanently locked hub in the same vein as the Maxi-drive hubs. I couldn't see these on the Longfield website though does anybody know what he charges for them and if they'll suit LC60 axles?

A1 bought these for his vit, they used to be on the web site a couple of weeks back when i was lookin but they seem to have moved of there site

[JeepRecoveryTeam]

Tony,

Let me know if it makes sense to bring a care package over in January.

I would love to explain to Airport security why 5 sets of 30 Spliners should not be considered a weapon LOL

Hey Dave i need a set for a FJ80

I tell you what. I'll bring the birfs... you let me borrow an 80 when I come over there... they'll be installed by the time I leave

I promise not to hurt it.