Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

center console

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

center console

Post by Pyrotech »

Has anyone built/modified an centre console to fit in to a Suzuki sierra?

Any ideas?

-Pyro
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

seen a couple ideas

Ammo box as per smilysmoke

I have two options for mine
i made a custom 6-9mm mdf wood one with padded top nice and deep. or
one of the $30 coolers from dick smith.

Can get pics if needed

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 166
Joined: Wed Aug 09, 2006 2:50 pm
Location: melbourne

ffd

Post by patzuki »

I use the factory Jimny with the two cupholders, fits perfect
you know you want one
Posts: 242
Joined: Thu Jun 15, 2006 10:24 pm
Location: sydney

Post by hyzook »

I acquired a Bestop one but found it didn't fit right and ended up using only the tray and hinge.
The tricky part is allowing the seat belts room so the seats can still slide
and the inside needs to allow the handbrake to come up.
Image
Image
Image
Posts: 287
Joined: Wed Feb 15, 2006 7:00 pm
Location: Perth, WA

Post by smiley_smoke »

here is mine.. ammo box cost like 12 bucks from disposal store
cup holders were 3 or 6 bucks each from crazy clarks.. few rivets and a cut out of one of the cup holders to fit over the old grab handle that i ripped off the top of the box.. fits nice behind the handbrake
oh and i used the dremel to open up the hole in the clipdown bracket.
then put a u bolt with a few nuts and lock nuts through the front of the case.
now its lockable and water tight.. my mobile isnt swimming in the passenger footwell ever again! :D
Image
Image
2" Susp lift, Ext shackles, RTC damper; Offsets, Custom interior panels, Stereo (+Sub), rubber Checkerplate floor, Custom Centre console, Under bonnet storage
Soon: Aircon + tinting?
Posts: 287
Joined: Wed Feb 15, 2006 7:00 pm
Location: Perth, WA

Post by smiley_smoke »

nicbeer wrote:seen a couple ideas

Ammo box as per smilysmoke

I have two options for mine
i made a custom 6-9mm mdf wood one with padded top nice and deep. or
one of the $30 coolers from dick smith.

Can get pics if needed

Nic
i bought one of those coolers as i gave my waeco cooler to my bro for his drive over east.. ill go check it out for measurements in the zook.. has cup holders also :D
2" Susp lift, Ext shackles, RTC damper; Offsets, Custom interior panels, Stereo (+Sub), rubber Checkerplate floor, Custom Centre console, Under bonnet storage
Soon: Aircon + tinting?
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Re: ffd

Post by =SKB= »

patzuki wrote:I use the factory Jimny with the two cupholders, fits perfect
Got Pics?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests