what wires do i have to put power to to disengage 4wd
as at the moment it is stuck in 4wd
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
toyota surf transfer case question
Moderators: toaddog, Elmo, DUDELUX
toyota surf transfer case question
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
At the back of the transfer case there is a 5 pin plug and socket for the shift motor. There is a row of three pins and a row of 2 pins in this socket. The 2 pins in the row of 2 control the motor. Connect + and - to these pins and the motor will run depending on the polarity you attach to it. The motor works the shifter quite quickly when you give it power.
Who is online
Users browsing this forum: No registered users and 0 guests