Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gen 3 Belt part number

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Gen 3 Belt part number

Post by bru21 »

I have a feeling my belt is too long. I just checked the part number its

6PK1995 EB
GM92089561

could someone check theirs and compare please.

its off a vx 2002 and I am talking about the accessories belt - the longer one not the ac belt. I think this is the cause of my steering woes.

I haven't looked up the ryco sites etc as they are normally wrong or out of date from my recent experience.

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 98
Joined: Thu Oct 21, 2004 9:26 am
Location: Newcastle

Post by BundyBrumby »

According to my listings here at work, the 6pk1995 is the correct belt for that motor. Does it have a sprung belt tensioner whick could be buggered?
YN65 X-Tra cab, 33's, 3" body lift otherwise stock. (the brumby got stolen)
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

hey mate Thanks for that. I went to one place and it is correct, then to another and the book said 6pk1980 - which is 155mm shorter so I ordered one. It appear the tensioner is ok just should have a shorter belt. Its always hard to know what you are getting when you buy a wrecked motor

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 129
Joined: Fri Nov 10, 2006 12:18 am
Location: Brisbane

Post by 1patrol »

Why would you look up a Ryco site lol they make filters i think it was the dayco site i used to use when we were stuck for part numbers either that or bosch it comes in handy sometimes :)
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

yeah i know ryco don't do belts. I have had big dramas with the ryco listings. the last 3 items I have purchased have been wrong :x

the Belt in the new gates book is 1980 and it fitted sweet, also my power steer now works sweet. althought the belt was $48 trade
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests