Will They Fit

[GRIMACE]

Will 295/75R16 tyres fit on my standard RR rims pictured below?

Just spoke with Bjanes and they are willing to change the tyres there holding for me ( stupid damn 265s what was i thinking )

[TuffRR]

They are a 7" rim so they should fit. The problem you will have is offsetting that rim. A 295mm wide tyre will rub severely running those rims. To put it into perspective, 35/10.5/16 ET's are 285mm wide and rub on my radius arms even with offset disco rims.

Of course you could always just adjust your steering stops, but they would need to be adjusted to the point of removing any steering ability.

But in answer to your original question - they will fit!

[GRIMACE]

SWEET

All i need know is to sedn these rims in to change the offset

Any Reccomendations?

Or if anyone has some cheap black rims with a good offset they willing to sell me preferably 5 of ?

[landy_man]

UMMMMM... those are alloys....
don't think you will find anyone to change the offset....

what you need is some steel disco rims

not sure of 295, but I know a 285/75 16 needs to LEGALLY be fitted to a 7.5" + rim....

so.... yes they will fit but they will rub like mad and are not legal on a 7" rim

[GRIMACE]

whats the difference in the offset of the steel disco rims they need to be 16"

If so you got a set to sell me cheap ? ? ?

[landy_man]

check my edit above

[landy_man]

i don't think there is much difference in the offset, but the steel disco rims can be changed... not expensive, usually about $50/wheel... they cut the center out and either flip it and move it or just move it and re-weld the centre in.

You can not do this with alloys.
Steel disco rims can be had for around $100 each from most Rover wreckers....some even sell them already correctly offset for various size tyres

[GRIMACE]

Isnt any welding on a rim illegal aswell????

I remember someone telling me that once

[Loanrangie]

Steel wheels are welded together in the first place so yes welding is legal but peripheral welding is throwned apon ie cutting and joining 2 rims together to increase width .

Isnt any welding on a rim illegal aswell????

I remember someone telling me that once

[Muzz110]

Graham Cooper Automotive gets rims made up. 16x8 strong as, bit pricy but worth it I recon. I was looking at off-setting disco rims but was told they are not real strong and they are only 7" anyway. About a year ago I couldn't find disco rims for under 150 each and were hard to come by. Then you gotta buy some 8" wide rims and swap the centres. The Graheme Cooper ones are heaps less hassle and stronger too.
http://www.lrexpert.com.au/custom-parts.php?page=defender

[GRIMACE]

What about in 15" wheels, the price I have spotted was abit above current wheel budget

Maybe I should post a wanted add for four or five 15" wheels with more offset ? Exactly how does the offset work? Is it the amount of mm measured from the wheelnuts to the furthest inner part of the rim???

? ? ? ha ha I just seen the new arms up

[rick130]

Anthony,
for all you wheel tech info go here http://www.rsracing.com/tech-wheel.html

rick

[Britswed]

Anthony i can get you steel rims anything from 15 x 7/15 x 8 or 16's starting at $125 each in black or white with 80MM off set

Cheers Mal

and yes reversed discio rims arent strong

[GRIMACE]

Mal I sent you a PM

16x8's would be nice the only thing is the offset and wider wheels have one down fall....... I am gonna have to fork out some more cash to fit a set of flares I was gonna avoid it to save the cash but hey I can change my mind right

[N*A*M]

IMHO, skinny mud tyres work better in Victorian slop.

[landy_man]

NAM I don't reckon he his in Vic.

( - for new avitar)

but yes i agree, skinnier tyres tend to dig down well here

[modman]

anthony, in melb. we get obc strength 16x8's for $200.
should be the same anywhere in aust.