Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RHD Steering Arms

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 35
Joined: Mon Nov 04, 2002 11:23 am
Location: USA

Contact:
Contact Chris Geiger

RHD Steering Arms

Post by Chris Geiger »

Trail-Gear has have been working on right hand drive high steer arms. The 4 stud units are looking good. Here is a sample set of 4 studs arms. Six stud arms are also in development.

There are the same high quality arms we sell here in the USA but they are cut for use in right hand drive rigs.

Image


We are really close to having these ready to ship.
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

So these and the 6 stud style will be the same price as shown for the LHD ? on your site .....


Glad to see that you are designing/manufacturing the RHD stuffaswell :cool:




Dan
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

left

Post by Webbie »

Chris these arms look like they are designed for studs/bolts not cone washers is this right.
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Hey Chris wouldnt it be easier and way more cost effective to just make both arms with 2 holes? Then they suit both Left or Right Drive. And you then sell only one set of arms that suit both styles.
Top
Posts: 35
Joined: Mon Nov 04, 2002 11:23 am
Location: USA

Contact:
Contact Chris Geiger

Re: left

Post by Chris Geiger »

Webbie wrote:Chris these arms look like they are designed for studs/bolts not cone washers is this right.
They use the factory studs, cones and washers.
Top
Posts: 35
Joined: Mon Nov 04, 2002 11:23 am
Location: USA

Contact:
Contact Chris Geiger

Post by Chris Geiger »

RUFF wrote:Hey Chris wouldnt it be easier and way more cost effective to just make both arms with 2 holes? Then they suit both Left or Right Drive. And you then sell only one set of arms that suit both styles.
That is a great idea and yes it would work. The down side is that you would have an extra hole on one side or the other. Here in the US I think our customers would be put off by that extra hole being there.
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

arms

Post by Webbie »

Bloody hell most AUSSIE's would love an extra hole to use not be scared off by it ;) ;) :P :armsup:
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Looks good post up when there ready hopefuly have some more $ to throw at the ute by then. MMM A extra hole :armsup:
plenty of parts on the bench
Top
Posts: 35
Joined: Mon Nov 04, 2002 11:23 am
Location: USA

Contact:
Contact Chris Geiger

Post by Chris Geiger »

Will do!
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

I will have a set soon For R&D once i have them and they are fitted i will let you all know how they go.


They should be a nice alternative and at a great price aswell.

We have got a set of 3" trail gear springs and man they flex awsome and drive great on the road geting the dual case setup and tcase gears in so ill let you know how they are aswell.

So far everything ive bought from TG has been outstanding.

If you want TG parts Give me a PM and i can arrange to bring them in im starting a TG Branch reseller over here in West Aus.

Dave
Top
Posts: 90
Joined: Sat May 22, 2004 1:34 pm
Location: WA

Post by pulux »

im starting a TG Branch reseller over here in West Aus.
This is really good news! I'll be interested to see how they go.

I love my TG 12" shaft!
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Ok Guys

Got the set of RHD hi steer from Trail Gear.

Fited them sat went all smooth and the product was of high quality together with the TG 3" front springs this system works!

Took the truck out for a 150km road test to feel out the ride compared to the Y arm crossover that we had installed prior and even without the steer stabalizer fitted the steering was great the truck seems to steer great and when the stabalizer is fitted it will be better.

Geting a wheel alignment and will let you know how the tyres handle the steering with wear indication and scrub etc.

Will give you progress as we get it going to do 1000ks on road and 2 trips offroad 1 rockcrawling run and a deep rutted slippery run if all goes well i beleive it will be an awsome setup and will come in at a very good price for every1.

Dave
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Sweet i was going to post on this so it was back at top of page but someone has done it so are they in stock yet Chris G
plenty of parts on the bench
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

I beleive they will be made forsale once we have the testing done to make sure everything is A ok.
Top
Posts: 35
Joined: Mon Nov 04, 2002 11:23 am
Location: USA

Contact:
Contact Chris Geiger

Post by Chris Geiger »

So far we have only made one set of prototype arms for testing. Once we are sure this is what we want, then we will run a few thousand sets.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Any news on how the prototype went and poss sales release date :?:
plenty of parts on the bench
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Prototype is going realy well ive been slack with a stuffed neck posting wise sorry.

The steering is fine all road manners are fine 1 trip offroad and all was good fitting shock hoops this weekend because the TG 3" springs flex way too much awsome spring good onroad and flex like fark offroad , then will give it the final test on some syco shit but from all we have done i see no problems at all tyre wear is good only done 800ks but no dramas.

The Estimated time on the hi steer is 2 months as they are making a lot.

Will be worth the wait for both quality and price.

Dave
Top
Posts: 199
Joined: Wed Jun 29, 2005 12:55 pm
Location: Gold Coast

Post by Rascal »

im starting a TG Branch reseller over here in West Aus
So what will the $AU price be on these arms.

RB
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

Post by tuf045 »

bulldogy wrote:Prototype is going realy well ive been slack with a stuffed neck posting wise sorry.

The steering is fine all road manners are fine 1 trip offroad and all was good fitting shock hoops this weekend because the TG 3" springs flex way too much awsome spring good onroad and flex like fark offroad , then will give it the final test on some syco shit but from all we have done i see no problems at all tyre wear is good only done 800ks but no dramas.

The Estimated time on the hi steer is 2 months as they are making a lot.

Will be worth the wait for both quality and price.

Dave
any updates on these arms?
Reptile fabrication.
www.agroautomotive.net
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Ditto some news from chriss would be good i have the $ now and also looking at seeing if it (+my ute) can be engineerer in QLD so some news is good news also like to have them before last weekend of may otherwise probably running a dodgey welded fliped arm in a comp :bad-words:
plenty of parts on the bench
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Sorry guys i dont have the date of release yet.

The proto 1s are going well over 1500 road ks and 2 offroad trips and no problems at all running the 36 iroks and duals.

Dave
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

just bring it back up the top and any news chriss.
plenty of parts on the bench
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Any news on date when they will be available. :?
plenty of parts on the bench
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Still havent got a definate date but it shouldnt be to much longer mate.

The price will be worth the wait.

Hang in there.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Fingers crossed :D
plenty of parts on the bench
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

any updates on these yet?
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Nat84 wrote:any updates on these yet?
X2 still hanging
plenty of parts on the bench
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

I will be hearing about the arms this week and will let you guys know.

Are you guys after the full hi steer kit eg arms ,tie rod ,drag link, pitman arm 80 series ball joints Ifs power steer mount kit and steering stabalizer?

Or are you just after the arms.


Dave
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Just arms for me got soild chromo tierod and already have all the rest done just :oops: welded arm :oops: sloshy :finger:
plenty of parts on the bench
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

Waiting a some arms for 60 series, guy reconds a couple of weeks till the next batch or RHDs are made (they are going to do around a 1000).
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 16 guests