LUX DUAL TRANSFERS

[SHANE055]

DOES ANYONE HAVE PICS OF DUAL TRANSFERS ON A HILUX PREFERABLY A SINGLE CAB AND PREFERABLY SOMETHING AROUND AN 03 MODEL I'M KEEN TO SEE WHERE THE SECOND CASE FITS IN

[ausyota]

From the marlin crawler website -
"Installing a dual transfer case into a 4-cyl equipped truck requires moving your existing t/case back approximately 6.5 inches. The additional crawl box is installed between the transmission and t/case. "

What you have is not realy dual transfers its 1.5 transfers
You keep the whole orig transfer and add the second reduction half of a transfer with an adaptor.

In Blue is orig transfer
In green is adaptor
In red is second reduction box.

If you need to see pics of them in a vehicle search around there are a few people with them fitted.
Also lots of info on www.pirate4x4.com

[ausyota]

Oh I just realised you will have a chain driven transfer if its in an '03.
That might make it a bit harder.

[Sic Lux]

i'd see it as two transfers because the bit on the back that isn't used with the case being fitted is just a step down to drive the front shaft. It be interesting to see it dome in a ifs lux don't really hear of it

[SHANE055]

trust me i'll be showing it off when i get it done and yeah its ifs but its f*ckin tough for an ifs so stop teasing me
also what happens with your tail shafts do they have to be modified due to the 6in move

[tuff-lux]

yes both drive shafts have to be resized

[Sic Lux]

It's also pitty becase it will never be as good as a solid axle nah hat's off to you for doing something diffrent