Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ factory disconnects and big lifts

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

GQ factory disconnects and big lifts

Post by sudso »

Just wondering what you blokes do with your factory sway bar disconnects after you've done a suspension lift of 3" or more.
The pivot bolt on mine snapped and the fulcrum was shagged too because the extra wheel travel with my lift put too much strain on it I suppose.
I think I flexed it a little too much with it still "connected".
Now I'm driving around disconnected.

Do ya's just put aftermarket links in or what?

cheers, sudso
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 897
Joined: Tue Aug 02, 2005 2:31 am
Location: Central Coast

Contact:
Contact MyGQ

Post by MyGQ »

I removed my swaybar, if you get a reasonable setup won't roll much.
AA's for Quitters
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Cut and sleeve them for the extra length required.
Top
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

I was going to lengthen my factory disco, but it would've been a big job, so removed front and rear swaybars. Bit more body roll as expected, but a lot more travel too.
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

MyGQ wrote:I removed my swaybar, if you get a reasonable setup won't roll much.
"much" lol
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

KIWI wrote:I was going to lengthen my factory disco, but it would've been a big job, so removed front and rear swaybars. Bit more body roll as expected, but a lot more travel too.
Yer mine was lengthened by screwing another rod to the bottom of the disconnect link (with the stopper in the same place) so the sway wasn't too much on an angle but it still only had the same amount of free travel in disconnect mode (1.5" each way). The passenger side link was lengthened about 3" too.

Do aftermarket disconnects bolt straight up to the disconnect side bracket? Cos the bracketry is different to the standard passenger side.

cheers, sudso
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

sudso wrote: Do aftermarket disconnects bolt straight up to the disconnect side bracket? Cos the bracketry is different to the standard passenger side.

cheers, sudso
From memory, I couldn't fit aftermarket disconnects due to the factory mounting.
If you find that you can, I might put some on mine to see what difference there is.



Dave
Top
Posts: 104
Joined: Thu Jan 26, 2006 2:07 pm
Location: Gippsland vic

Post by Fozdick »

This is what i did

http://www.outerlimits4x4.com/viewtopic ... highlight=
TB SLUG. Dints, Cracks, Scratches, Rust, Mud, Broken Bits and Rattles.
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

No one throw your factory disconnect set ups away cos I have an idea.
Just got to try it on mine 1st.
cheers
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

they drive fine without swaybars
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 25 guests