Quick diff question

Post by **built4thrashing** » Mon Apr 02, 2007 7:42 pm

Will a 1.3 NT diff ctr fit in a WT housing? are axle splines the same ?

Or do i have to swap over the crown wheel and pinion?

thanx

Post by **muppet_man67** » Mon Apr 02, 2007 7:57 pm

yep they are the same exept for ratios.

Post by **NIK** » Mon Apr 02, 2007 7:57 pm

The centres will bolt in the same as the wt ones but make sure you have the same ratio f & r I think nt are 3.9 and wt are 3.7.
Nik

Post by **built4thrashing** » Mon Apr 02, 2007 8:09 pm

sweet

mate in the bush has found me a rusted out NT with perfect running gear so im gonna swap diffs to get better gearing.

Post by **NIK** » Mon Apr 02, 2007 8:54 pm

Yes thats what I did and with the front you should get the 4 pin carrier which can take a locker.
Nik

Post by **built4thrashing** » Tue Apr 03, 2007 8:04 pm

prob gonna swap the welded ctr over in the rear and change the crown gears. Not to fussed ATM with a locked front. I still drive it on the hard stuff

Outer Limits 4x4 Board