Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearbox Out on RB30 whos done it?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Gearbox Out on RB30 whos done it?

Post by NutterGQ »

I have read every thread on here and there all about the 4.2 which I have done.......

Who has done an RB30 with the 300ZX gearbox?

Are they as heavy? and any special tricks to getting them out?

Just doing a clutch swap which is not the bit I'm worried about more so the removal/refitting anything I should know?
Top
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Contact:
Contact GRINCH

Post by GRINCH »

they're not much lighter. to remove and refit they are the same process as the 4.2 boxes, just one thing to watch, if you remove the transfer, drain the oil out of the gearbox first as the front of the transfer seals the back of the gearbox. i found out the hard way :oops:
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests