Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ second and third batt under bonnet?
GQ second and third batt under bonnet?
hi guys, Ive heard that you can buy a battery tray for a GQ that holds 2 batteries down the passanger side of the engine bay has anyone seen, heard or made one like this. Already have deep cycle batt in the rear of the car and want 2 batteries up front for my new winch.
i got nothin
in the old mans GQ, he had had an 8inch battery in the back right hand corner that could fit an optima, they are used in fuel inject petrols im pretty sure. Then you could run another 12inch where the radiator overflow bottle is, which is were they normally put them.
[color=red][size=150][b]CTRL + W[/b][/size][/color]
would like to get 2 12inch batteries in there if i can, it seems as though there is enough room to do so as i have fitted a smaller overflow bottle behind the head light in front of the air intake from the snorkle. So would just need to relocate the coil to suit I thought it could go where the overflow bottle was with a longer lead to the dizzy.
i got nothin
[quote="GQTrav"]As hottie said, i would be careful about the amount of weight, i've seen inner guards crack with just a single battery, let alone having two of them.[/quote]
How would you go about bracing it? i was thinkin of bracing it from the radiator support panel through to the fire wall x 2, have 3 supports back to the top of the guard and 2 props under it to the inner guard.
How would you go about bracing it? i was thinkin of bracing it from the radiator support panel through to the fire wall x 2, have 3 supports back to the top of the guard and 2 props under it to the inner guard.
i got nothin
If you can take a look at the GU behind the plastic inner gaurd, they have a diagonal brace not on the GQ. I'm currently building a new car and put some 30mm box across the top of the inner gaurd(fits nicely under the outer gaurd) and a diagonal brace back to the "A" pillar, every GQ I've looked at is cracked around the inner gaurd above the steering box and where the inner gaurds attach to th "A" pillars.
Joel
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
[quote="PGS 4WD"] every GQ I've looked at is cracked around the inner gaurd above the steering box and where the inner gaurds attach to th "A" pillars.
Joel[/quote]
Ill have a look at my GU in the morning, But I was talkin about the passanger side the steering box is on the drivers side. Or did you mean both sides?
Joel[/quote]
Ill have a look at my GU in the morning, But I was talkin about the passanger side the steering box is on the drivers side. Or did you mean both sides?
i got nothin
Who is online
Users browsing this forum: No registered users and 6 guests