Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

damaged sidewall

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1453
Joined: Tue Jul 12, 2005 10:13 pm
Location: Melbourne, Victoria

damaged sidewall

Post by wrksux »

Well staked my drivers side front tyre at gemmy on Sunday tiny hole like less than 3mm long, tyre shop wont touch it Pro comp told me its my problem. otherwise can a shop vulcanize the sidewall (will someone do it), even if i don't run it on the road as a spare otherwise its a very expensive bit of garbage and on a uni budget i cant really afford to buy another brand new pro comp.

Cheers
Tim
It's simple: questions are inherently good. Your questions... not so much

2003 GUIII turbo intercooled 4.2 DX
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

I had mine fixed like that. was told it was a major repair as they called it.

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

take it off the car, take it down and get it done as a farm hack tyre...un regoed offroad only, dont run it as a road tyre, but as a spare should be ok, as long as its just to get you out of trouble
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 1453
Joined: Tue Jul 12, 2005 10:13 pm
Location: Melbourne, Victoria

Post by wrksux »

can anyone recoemend a place either here or via PM that will do it or what i need to say specificly as 3 places all said no. the cut is luck to be 5mm long it was just a sharp stick :cry: im in SE melb

Cheers
Tim
It's simple: questions are inherently good. Your questions... not so much

2003 GUIII turbo intercooled 4.2 DX
Top
Posts: 303
Joined: Wed Nov 24, 2004 8:25 pm
Location: gold coast

Post by mavzilla »

get it major repaired or vulcanized and run it on the car no probs. 15000kms on 2 major repairs no probs
wish list (lockers,lift,endless air,winch,bar,spotties,35s,paint job,turbo,18yrs old hottie
Top
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

A few plugs and a bunch of sikaflex :D (not reccomended for road used tyres ;) )
60 + Turbo, 33"s :armsup:
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

Any truck tyre dealer will be able to get it repaired. As has been stated a side wall puncture is called a major repair and can be done to run on the road.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Top
Posts: 751
Joined: Wed May 21, 2003 11:33 am
Location: Melbourne, AUS

Contact:
Contact FireTruck

Post by FireTruck »

Eastland Tyres, New St, Ringwood... will be there myself in the next week or so with my 40" sticky that I tore...
www.TeamFireBug.com

Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
Top
Posts: 55
Joined: Sat Apr 09, 2005 1:04 pm
Location: SYDNEY

Post by #DISTURBED# »

had the my old set repaired several times the bigest side wall tear was
30mm long it still holdin up on the work ute
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 135 guests