Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

35's on 78Series cruiser

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 8
Joined: Mon May 15, 2006 8:10 am
Location: gold coast

35's on 78Series cruiser

Post by swart TJ »

Hi all

I've got 2 questions re. 78series ute

1) whats needed to make 35" tyres clear on the front end, tray is easy enough to lift at the rear...
2) can I fit 15" rims to the cruiser?? I prefer to stay with 15" rims since ive got a few sets lying around (35x12.5 BFG AT's and 35x13.5 BFG crawlers)

thanks
2003 Wrangler, 4"SL+2"BL, SYE, F+R Airlocker,4.56 ratios & 35"
Top
Posts: 34
Joined: Wed Jan 17, 2007 7:51 pm
Location: Cairns

Post by cruiserute75 »

not 100% sure but last time i checked no one made 15s for 78/79. although this was a while back. also this might be due to clearance of brake rotor/caliper, although dont hold me to that. as for clearance, im no expert but i'd say just a decent lift should allow enough room, like 3 to 4 inch suspension. possibly body. theres a few blokes on here running 305 or 315 r 16 which are equal to 35's and im pretty sure they only have suspension lift. hope this helps.

mick
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests