my mates GQ is leaking oil from one of the swivel hubs. parked for about 8 hours it leaked approx 5ml onto the wheel/ground.
a couple of questions...
1. is he still able to drive? in 2wd? 4wd?
2. would MORE oil leak as it is driving?
3. when installing new seals, does the swivel hub come apart and diff centre out (reason i ask is he might kill 2 birds and put a locker in the front)
4. lockright lockers in the front > anyone had problems steering? noises?
thanks everyone
PAUL
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Leaking Swivel Hub
Re: Leaking Swivel Hub
1. yes, yes
2. yes
3. no need to take diff centre out
4. fit an arb
2. yes
3. no need to take diff centre out
4. fit an arb
Gq ute new built
seals
thanks for that...
can they be done by anyone with a spanner? do you need to adjust anything int he swivel hub? have done wheel bearings before if that helps.
cheers
PAUL
can they be done by anyone with a spanner? do you need to adjust anything int he swivel hub? have done wheel bearings before if that helps.
cheers
PAUL
dead simple job really, dont lose the kingpin shims and make sure they back where they came from ie bottom goes back on the bottom.
I made nice little tool for knocking these seals in as when I broke CVs I would destroy this as well
made the job even easier ~ 20 min trackside to replace already prepped cv
I made nice little tool for knocking these seals in as when I broke CVs I would destroy this as well

Re: Leaking Swivel Hub
[quote="hottiemonster"]1. yes, yes
2. yes
3. no need to take diff centre out
4. fit an arb[/quote]
yep what he said!
2. yes
3. no need to take diff centre out
4. fit an arb[/quote]
yep what he said!
i got nothin
Who is online
Users browsing this forum: No registered users and 5 guests