Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

idle speed adjustment 6G72

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 71
Joined: Sat Jan 01, 2005 10:37 pm
Location: Melbourne Australia

idle speed adjustment 6G72

Post by rhymus »

G'day, I replaced the engine in the 88 NF about 8 weeks ago. All good for a while until recently the idle speed has been climbing, won't idle at less than 1500 - 1800 RPM. I have readjusted the timing to spec. and this has lowered the idle a little to around 1000-1100rpm. No air con on in neutral. auto trans. 3.0 v6 came from 1992 NH?
Top
Posts: 90
Joined: Tue Oct 10, 2006 2:18 pm
Location: Brizvegas

Post by Mechz »

Is it like that all the time or just when you start it up?

My 91 NH tends to idle at 1500rpm for a fair while until it's at operating temp then it varies between 750 and 1000rpm.
92' NH Pajero SWB 3.0 V6
Top
Posts: 71
Joined: Sat Jan 01, 2005 10:37 pm
Location: Melbourne Australia

Post by rhymus »

Idle stays high well after full temp has been reached. In some cases does not come down at all. Idle speed is set by coolant temp going into solenoid correct? Any way to check proper operation of solenoid?
92 NH Pajero, MQ Patrol 50mm lift. One has custom rust, dents & rattles, the other has a blown engine.
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

There is an idle bypass srew at the back of the throttle body, leaning towards the firewall. Turn it in to lower the idle. If it still idles high then you may have a crook idle solenoid or cold start solenoid.(the thing with water hoses going into it)
Top
Posts: 71
Joined: Sat Jan 01, 2005 10:37 pm
Location: Melbourne Australia

Post by rhymus »

Thanks. I'll give that a go. I appreciate the your responses.
92 NH Pajero, MQ Patrol 50mm lift. One has custom rust, dents & rattles, the other has a blown engine.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest