Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will a Transfer case from an R series fit a W series gearbox

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

Will a Transfer case from an R series fit a W series gearbox

Post by leehamescort »

Will the transfercase from my R151 Surf gearbox (chain driven) fit an earlier model Hilux gearbox (that would have a gear driven transfer)?

Or vise versa?

Cheers
Leeham
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

No...unless you put the input shaft from the appropriate box in the other transfer, then it might..the spline count is different..the housings look thesame...alot better to get the correct transfer and sell your old one.
Top
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

Post by leehamescort »

Thanks, I wanted to keep my transfer as it has reduction gears in it.

Cheers
Leeham
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Top
Posts: 79
Joined: Mon Dec 04, 2006 5:53 am
Location: Middlemount, QLD

Post by diby_2000 »

Short answer, No. Have a look at marlin's website
http://www.marlincrawler.com
Heaps of info on there
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest