Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tailgate swap to barn doors. ?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 15
Joined: Fri Mar 09, 2007 7:49 pm
Location: I WANT ONE !!

Tailgate swap to barn doors. ?

Post by 80.Cruiser »

Hi,
May sound silly but was wondering if it was possible to change from tailgate setup to barn doors ? Im thinking that Toyota in their wisdom would make them interchangable :)....
If so..is it just bolt on?
94 80 series.
Thanks :)
80 Cruiser
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Yeah the doors are bolt on.

After you do some cutting and welding :finger:
Top
Posts: 15
Joined: Fri Mar 09, 2007 7:49 pm
Location: I WANT ONE !!

Post by 80.Cruiser »

oh well.....jap's arn't as smart as i assumed :roll:
80 Cruiser
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Yeah i recon the up and down doors suck too :bad-words:
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

just to clarify, the entire door sill and hinge mounting is different, and the only way to do the swap would be to have a complete, straight DX/Standard rear end to cut and weld on. It would be a pretty big job and it would be arguably easier to buy a DX and swap all the GXL gear onto it.

cheers

DD
Free air locker to the first 20 callers!
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Barn doors are easier for getting stuff in and out of as you don't have to reach/climb over the tail gate. But the drop down tail gate makes for a perfect table for making kids lunches on when out 4x4ing :D

I myself prefer the drop down tail gate as I find the "table" it makes handy
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

But making a table that folds down when the door is open is easy anyway. Attach it to the RH door with a hinge at the bottom and fold it up when you close the door.
Top
Posts: 9
Joined: Tue Jan 31, 2006 8:30 am

Post by hoser »

dumbdunce wrote:just to clarify, the entire door sill and hinge mounting is different, and the only way to do the swap would be to have a complete, straight DX/Standard rear end to cut and weld on.
Does the same apply to the 100 series? Are the door styles not swappable?
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Cant be done easily.....gates are good to shelter under in the rain but a pain on a lifted 80...doors are good for grannies, gates are good for change tables...each to their own....
Gates bend, doors squeek
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

RUFF wrote:But making a table that folds down when the door is open is easy anyway. Attach it to the RH door with a hinge at the bottom and fold it up when you close the door.


Too much work for me.
Top
Posts: 943
Joined: Sun Aug 24, 2003 2:42 pm
Location: Launceston

Post by Bluey »

i think all barn doors/lift up doors are incompatible. we got a quote on a work mercedes van which had lift up doors to change over to barn doors (so could load things from/to forklift), was over $10k. guy said just sell it and buy another
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests