Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rusty welsh plugs
Moderator: Tiny
Rusty welsh plugs
So its finally time to install the gearbox and transfer case I bought from Heath in Newcastle, (thanks Heath). I pulls the motor/gearbox/transfer case out as one, and split them. While they are apart, I notice fluid trickling down at the rear between the block and the plate that is bolted behind the fly wheel. Knowing there is a welsh plug there, its lucky I found it now, and go to replace it. I remove the clutch, and spend half an hour getting the flywheel off. Someone had used real good locktite on the bolts. I unbolt the plate, only to find a perfect welsh plug, and a build up of muddy water and crud, which had been leaking slowly out. BUGGER.
Mud makes excellent toothpaste.
Who is online
Users browsing this forum: No registered users and 0 guests