I have a 1994 series 80 diesel cruiser which is fitted with an AXT turbo. The intercooler is air to air and has a booster fan fitted to it, which is great at low speeds. Fan runs only when turbo boost reaches pre-set pressure, this can be adjusted. I want to put air into the intercooler.
The fan is not needed at highway speed if I can get the air through the intercooler, the fan can be turned off at highway speeds.
Current Snorkel puts air into the engine.
I want to know if a snorkel is available in the profile that will fit the LHS of the vehicle that can be the air intake for the intercooler, ie cooling air.
I intend to have this air flow through the fan even when the fan is off. But this will allow the fan can do the job at low speeds and high revs, ie no forced air from snorkel. At highway speeds the snorkel forced air will take over and the fan can be turned off.
Any assistance appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Series 80 Cruiser Intercooler Snorkel
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 0 guests