Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gu diffs

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 88
Joined: Thu Nov 17, 2005 10:23 pm
Location: traralgon, vic

Gu diffs

Post by mattlux »

What are gu diffs selling for at the moment and who is a good source for them? Just after a few ideas thanks guys.
Top
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

are u looking for diff centers or the whole thing. have u tried louges or u pick car wreckers in morwell

cheers adam
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Top
Posts: 88
Joined: Thu Nov 17, 2005 10:23 pm
Location: traralgon, vic

Post by mattlux »

adam penfold wrote:are u looking for diff centers or the whole thing. have u tried louges or u pick car wreckers in morwell
Mainly after prices on front, disc to disc with no centre
Top
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

i no a bloke that had a full set of gq diffs i can ask him if he still has them
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Top
Posts: 88
Joined: Thu Nov 17, 2005 10:23 pm
Location: traralgon, vic

Post by mattlux »

adam penfold wrote:i no a bloke that had a full set of gq diffs i can ask him if he still has them
Mate i have gq diffs i need a GU one!
Top
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

o sorry i though u migh of had a hilux due to your name.i think i no were a strenghtened 1 is.ill look in to it 4 ya
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

$2500 complete is the going rate
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

I was quoted $900 for a front GU housing alone, & then they'll give me $450 for mine once i swap the innards over.
Top
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

$900 is that with swivel hubs, brakes,cv's and axles as only the centre fits the gu from the gq ?I too would like to go gu diffs but too expensive me thinks.
THE GRASS MAY BE GREENER ON THE OTHER SIDE BUT YOU STILL GOTTA MOW IT.
Top
Posts: 592
Joined: Wed Apr 19, 2006 8:19 pm
Location: ipswich

Post by rover1 »

i got mine 2nd hand, complete less centre, 1750 and it was braced.
cheers Pete.

its the skinny pedal
Top
Posts: 312
Joined: Sat Feb 08, 2003 12:49 pm
Location: Esperance WA, currently travelling around OZ

Post by GQ Toy »

Local wrecker promised me a front diff complete hub to hub for $1400 - unfortunately he did not get the vehicle :cry:
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

Will GU cv's and diff centre fit into GQ axle housing and pumpkin? or do you need to replace the lot, disc to disc? Probably a dumb question, but anyway there it is.

Also, is it worth swapping rear axles and diff, or are the GQ's tough enough?

Any probs running GU front, GQ rear, 4.625 ratio on each?
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

GU/GQ centers are the same all the fronts are H233. If you have a relatively new ARB then it will fit in either GQ/GU front no problems. If its an old GQ locker then the GU axles will be 5-10mm to long. THeres some kind of block in the locker that can be removed though, so the rumour goes.
But nothing else will swap over. As there wider, so longer axles. Brakes are different and better. CV, are bigger and better etc.
But they will almost bolt straight into a GQ. Just need new Panhard rod and steering arm.
THOUGHT FOR THE DAY....
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

steel wrote:I was quoted $900 for a front GU housing alone, & then they'll give me $450 for mine once i swap the innards over.
GQ Diff housing when I priced one was $1300 from Nissan new.
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

turps wrote:GU/GQ centers are the same all the fronts are H233. If you have a relatively new ARB then it will fit in either GQ/GU front no problems. If its an old GQ locker then the GU axles will be 5-10mm to long. THeres some kind of block in the locker that can be removed though, so the rumour goes.
But nothing else will swap over. As there wider, so longer axles. Brakes are different and better. CV, are bigger and better etc.
But they will almost bolt straight into a GQ. Just need new Panhard rod and steering arm.
yeah cool. What about rear? Is it better swapped too, or is GQ tuff enough?
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 88
Joined: Thu Nov 17, 2005 10:23 pm
Location: traralgon, vic

Post by mattlux »

turps wrote:If you have a relatively new ARB then it will fit in either GQ/GU front no problems.
Which is the RD78a locker i believe, anyone know for sure that if you have this locker you dont need to hack the 5mm off the axles
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

all gu with h233b diff are the same as gq just have 20mm thicker axle bearing flange on housing n longer axle, same brake caliper n rotor
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

mattlux wrote:
turps wrote:If you have a relatively new ARB then it will fit in either GQ/GU front no problems.
Which is the RD78a locker i believe, anyone know for sure that if you have this locker you dont need to hack the 5mm off the axles
From what I understand the thrust block or whatever it is in the locker has been removed and works fine in either.
THOUGHT FOR THE DAY....
Top
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

I paid 1500CASH at central coast4X4 wreckers without the center and threw the locker straight across. BEAWARE, my mate got caught out, we think it was a 4.8, but the calipers were were too thick to put a 15X8 rim over them without doing nasty shit to them. :roll: :roll: ohyeah, in all the excitement dont forget to laminate it first, they cost too much togo bending :D
innovation is better, better is faster, and fast is all that counts
Top
Posts: 335
Joined: Mon Oct 10, 2005 10:33 pm
Location: newcastle

i got gu front

Post by xenith »

I got a gu front & gu rear for $80 compleat :lol: :cool: :armsup:
it will go or it will blow
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 60 guests