Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fitting water cooled CT20

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

fitting water cooled CT20

Post by Guy »

My new turbo has arrived and it is truely a reco.. The thing is a bit newer than the one I removed and is water cooled.

Anyone have pics of how it is setup .. ( I have read few descriptions of how it works and cant seem to figure out how to do it properly)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

i swapped my water cooled to non water cooled, there are some lines and bits, ill; see what i can dig out (most went to the tip though) or at least take some pics, it was a 2.4lt bundy though but should be the same.
will post tonight for ya
cam
[quote="75 cruser"]we want more donkey[/quote]
Top
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

Post by crack »

when you say watercooled does it run water through from the radiator or do u mean it was running a intercooler? as i said in another post not a mechanical guru

cheers
jack
If all else fails, use a bigger hammer

hilux- locked lifted and turboed
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

On mates dts one it taps into the heater hose near thermostat and the heater hose near firewall i think try get pic's tommorow night
plenty of parts on the bench
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

crack wrote:when you say watercooled does it run water through from the radiator or do u mean it was running a intercooler? as i said in another post not a mechanical guru

cheers
jack
The bearing on the turbo is water cooled.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 87
Joined: Tue Feb 15, 2005 3:22 am
Location: WA

Post by fisho64 »

just tap into the two heater hoses, but make sure it is on the engine side of the heater "off" valve, otherwise you will get no flow when the heater is off.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

yeah thats how mates is done 100%
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest