Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Oil cooler efficiency

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 167
Joined: Mon Jul 17, 2006 8:30 pm
Location: Northern Sydney

Oil cooler efficiency

Post by rixrunner »

Would two smaller top quality oil coolers with a fan each be as efficient (or better or worse) than one large top quality oil coller with a large fan ??

This being with the total cooler surface area being roughly the same in each case.



Ricky
Try to keep at least one wheel on the ground at all times !!!!!! (unless you want to do a jump....... thats different)
Top
Posts: 125
Joined: Sun Jan 29, 2006 11:10 am
Location: Brisbane

Contact:
Contact blurredvision

Post by blurredvision »

Dont know about the coolers themselves, but the larger single fan would surely pull a lot more air through it. From this and the fact that there are less parts and complexity it would be the better.
http://www.dirtcomp.com.au/
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Yeah, a single fan will pull more air through, and the less joins the better if you're far from nowhere. :lol:

Is the application dependant on space?

Having to enter 2 coolers it may cause more of a restriction in the oil flow.

Due to heat flow being dependant on the temperature gradient, the one cooler may be more efficient in dissipating heat to the atmosphere.
In a 2 cooler setup, the first cooler will remove x amount of heat, and the second cooler will recieve oil of a lower temperature. This may cause less heat to be dissipated.

I think one larger would be cheaper also.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Top
Posts: 167
Joined: Mon Jul 17, 2006 8:30 pm
Location: Northern Sydney

Post by rixrunner »

Cheers for the replies.... some good points to concider.

It is a space issue, I am sure I can get a large one in, but two smaller would be neater for me.

Thanks again.


Ricky
Try to keep at least one wheel on the ground at all times !!!!!! (unless you want to do a jump....... thats different)
Top
Posts: 58
Joined: Sun Jun 10, 2007 5:06 am

Post by krf_bb »

large cappacity are always best its just getting the room to mount them
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 49 guests