Hey,
after my 1st cambelt was done at 97000 (Now onto my 3rd cam belt at 100 000km) don't ask.... a few things were done, new cam cover gaskets, new plugs, etc I have a slight missfire at idle.
It seems to be worse after a long run, cold fast idle it appears fine however it is hard to tell with it running fast.
Seems to pull fine and have as much torque as normal at light throttle inputs just above idle. Don't notice a miss fire at all through the rev range and is definately running on 6.
Most noticeable when off throttle from 1100 rpm down to idle - goes pop pop pop (ish) such as idling with the a/c on as it drops in the revs as it switches in and out.
Any ideas?
NJ
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Slight miss at idle
Moderator: -Scott-
Slight miss at idle
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
Who is online
Users browsing this forum: No registered users and 0 guests