Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

efi 5ltr in a hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

efi 5ltr in a hilux

Post by tozook »

ok i'm after some pic's of a hilux or 4 runner with a holden efi 5ltr fitted

i'm running a v6 auto now but its about dead and its the second motor in about 6 months so i thinking of fitting a holden v8 i've been told that the v6 Adaptor & shaft will fit in a v8 t700 gearbox

has anyone have any cooling problems if so what have you done to fix the problem?

thanks matt
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Haven't got mine in yet but heres a link to my main thread, hope it answers some questions.

http://www.4wdmonthly.com.au/forum/show ... hp?t=29977

My observations so far,

Will probably need to ditch the aircon radiator to fit a thermo in front of the radiator.

The gearbox will move rearwards by about 2 to 3" so transmission mound and console mods will be required.

A bonnet scoop of some description will help by allowing more fresh air to circulate around the motor for cooling.

The stock exhaust manifold will definitely not fit on the drivers side, it fouls the steering column.

marks do not make adaptors for autos, but maybe someone else does.

Should go like stink when complete :twisted:

Cheers
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Post by Tuflux308 »

Done this conversion in my single cab, using 308, very tight fit, and you will have problem after problem with keeping it cool, other than that its definately worth it. rtying to run a clutched fan is damn near impossible, so i have fixed plastic fan, with 5 litre vs ss radiator, and custom shroud with 16" thermo on the front, works good but will still hit 100 degrees on hard 4wdriving .i have one V belt that runs , water pump, alt, and power steering, and just miss's the fan.. room is really the only serios issue, but a few trail fits and you will see what i mean. alloy radiator made to fit would be the way to go, mine works now but was a serious headache to get right.
I didnt have any probs with exhaust, but mine was spring at that stage, the auto is the way to go, i have t350 and love it, t700 would be even better. Broke tooo many manuels and finally got an auto, and never had a problem since. i have heaps of photo's of the conversion, will get some and show room etc..
ggod luck its worth it, will dominate on and off road, but remember, diffs will go next.!
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

ok tossing up with a efi v8 or a vs-vt supercharger v6 motor
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
Posts: 396
Joined: Mon Jul 17, 2006 10:37 pm

Post by WRXZook »

I've got a efi 5 litre in an 84 hilux with dyna box. It has a 3 inch body lift. I widened the original space and fitted the 5 litre Commodore radiator forward under the bonnet latch. With an earlier model water pump (1 inch shorter) the clutch fan fits easily as does the slightly modified shroud. The extractors fit fine on the drivers side, but very tight on the passenger side, needs a little modifying to give clearance of the chassis. It's going to a new home tonight, but if I get the chance will take some pictures. I also have modified an AU twin fan to fit (easy), but didn't try it as I prefer the cluch fan
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

i would like to fit a 5 litre Commodore radiator but my ifs steering box is in the way

if the v8 goes ahead i will see how my hj47 diesel Landcruiser radiator & 16" thermo goes

yes pic's would be great

thanks matt
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
Posts: 230
Joined: Wed Jun 21, 2006 7:38 pm

Post by kinglakekustoms »

Hey mate we put an inject 5ltr in a 92 lux with the t700 auto. We did it all ourselves if your after any info pm me and if your after some detailed pics let me no
Here are some pics of the conversion

http://s84.photobucket.com/albums/k11/kinglakekustoms/
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
Posts: 357
Joined: Fri Nov 07, 2003 3:30 am
Location: Mount Beauty

Post by Trusa »

Hey Matt,

I thought you sold that lux? This is the blue coiled rear extra cab?
tozook wrote:i'm running a v6 auto now but its about dead and its the second motor in about 6 months so i thinking of fitting a holden v8 i've been told that the v6 Adaptor & shaft will fit in a v8 t700 gearbox
Does anyone know if this is true as I'm looking to do the same.

Ben
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

Trusa wrote:Hey Matt,

I thought you sold that lux? This is the blue coiled rear extra cab?
i pull out of the sale as the motor & gear box is about rooted
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

kinglakekustoms wrote:Hey mate we put an inject 5ltr in a 92 lux with the t700 auto. We did it all ourselves if your after any info pm me and if your after some detailed pics let me no
Here are some pics of the conversion

http://s84.photobucket.com/albums/k11/kinglakekustoms/
cheers matt just looking at the pic's now

what are you doing to keep it cool?
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

What about a 1UZ?
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

i want to keep the auto
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
Posts: 230
Joined: Wed Jun 21, 2006 7:38 pm

Post by kinglakekustoms »

tozook wrote:
kinglakekustoms wrote:Hey mate we put an inject 5ltr in a 92 lux with the t700 auto. We did it all ourselves if your after any info pm me and if your after some detailed pics let me no
Here are some pics of the conversion

http://s84.photobucket.com/albums/k11/kinglakekustoms/
cheers matt just looking at the pic's now

what are you doing to keep it cool?
Hey mate .we are using the VN V8 radiator that came out of the donor car with two ten inch Davis Craig thermos to keep it at a good temperature on road.
And a separate tray mounted trans cooler with its own 15inch fan so that the radiator doesn’t have to cool both the engine and trans it help heaps with getting the temp down

For off road use cooling is defiantly an issue .As said before there is absolutely no room for a clutch fan so a rear mount radiator would have to be the go.
Down the track that is the set up that we will end up with but the current set will do until the custom tray is built..


Some pic`s of the radiator and the clearance between the engine and radiator

Image

Image
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests