Recenty my HJ75 has been leaking fulid out the clutch master cylinder. It is weeping out of the piston inside the cab. Is there a rubber seal in there that can be replaced or is it a throw away sealed unit.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2H clutch master cylinder
Moderators: toaddog, Elmo, DUDELUX
You can get rebuild kits, but the bore of the m/cyl are easily scored/corroded. Less headache by just replacing it. May want to check/replace the slave while you're at it, they are where the crap ends up and normally last less than the master.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.
The bigger the boy, the bigger the TOY!!
Who is online
Users browsing this forum: No registered users and 0 guests