Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

I need aluminium in Melbournes South East

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

I need aluminium in Melbournes South East

Post by g35me »

I need a piece of aluminium 25mm wide x 15mm high x 122mm long. Who sells stuff like that in Melbournes South East?
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Re: I need aluminium in Melbournes South East

Post by awill4x4 »

brian haines wrote:I need a piece of aluminium 25mm wide x 15mm high x 122mm long. Who sells stuff like that in Melbournes South East?
Brian, I think we've got some 15mm thick aluminium at work. I'll check it out tomorrow and if we've got any I'll cut it down on the bandsaw for you. If I can find an offcut piece I'm pretty certain it won't cost you anything. I live in Berwick also and you can pick it up at my place if you like.
Give me a ring at work tomorrow on 9775 0558 cause I've got a memory like a sieve. I'll be working late tomorrow night on my after hours part time aluminium welding job and I should be back about 9 pm.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: I need aluminium in Melbournes South East

Post by bogged »

capral ally in Greens road dande?
Top
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville

Contact:
Contact MUSS

Re: I need aluminium in Melbournes South East

Post by MUSS »

bogged wrote:capral ally in Greens road dande?
x2 :armsup:
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Top
Posts: 85
Joined: Thu Jan 22, 2004 6:19 pm
Location: eastern melbourne

Post by TwistedMQ »

Smart aluminium in bayswater.
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Fcuk Capral and Smart, D&F Racing Products to the rescue yet again. :D
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Post by g35me »

Thanks Andrew, if this was ebay you would have 100% positive feedback on this one :)
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

seeing how you've been looked after,

who sells al and steel on mornington penn?
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

YankeeDave wrote:seeing how you've been looked after,

who sells al and steel on mornington penn?
Don't know about the peninsular but we get our Aluminium from Action Aluminium in Greens Rd Dandy (couple of "ex Smart" guys own it) and our steel from Melsteel in Hallam.
If it's only small pieces we may have some in stock.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

awill4x4 wrote:Fcuk Capral and Smart, D&F Racing Products to the rescue yet again. :D
Regards Andrew.
do they have ICooler cores in stock??`
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests