Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FJ60 Suspension

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 3
Joined: Tue Apr 24, 2007 10:20 pm
Location: Perth

FJ60 Suspension

Post by griff88 »

Hi All New To Outer Limits Recently Bought FJ60 And Heard About Outer Limits Through Another Site. Anyway To The Point. I Have Just Put New Springs and Shackles On My Car I Can See The Shackles Are 4inches Oversize and Told The Springs Are Two Inches Over Size. MY QUESTION IS????? Nobody Can Tell me What The Standard Height Is Of A 60 Series Is. Ive Tried ARB Pedders TJM A Few Suspension Places In Perth But Nobody Can Tell Me What The Standard Height Is. I Can Buy What Ever Size Lift Springs I Want But Know Body Can Tell Me What The Standard Height Is.. Im Tring To Work Out Exactly How High I Have Lifted The Car If Anyone Can Help Me It Would Be Much Appreciated. Thanks..
FJ60 4inch Shackles 2inch springs soon 2inch body
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

http://carl.outerlimits4x4.com/viewtopi ... t=measured

my hj60 has origonal springs in it

If you measure from the centre of the hub to the edge of the wheel arch,
Just measured my 89 HJ60, still on origonal stock standard toyota springs.

480 rear (18.9")
515 front (20.3")

mine has probably sagged a bit but my shackle angles are still pretty good so it hasnt sagged an inch or anything. So a good estimate of origonal stock standard would be about 19.5" rear, 20.5" front.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest