Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pyrometer gauges?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

pyrometer gauges?

Post by vanbox »

where in australia can i get a white face, 2" (and a bit) electronic pyro gauge and probe in CELSIUS?

i cant seem to find them anywhere.

cheers

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Most of the gauges are measured in F, like Autometer, etc.

The only ones I could find in white and celsius are:

Image
http://www.modyourcar.com.au/product_in ... ts_id=4314


Image
http://www.modyourcar.com.au/product_in ... cts_id=479
But its 60mm.


If you can handle having a gauge with a black face... fair bit cheaper
VDO Pyrometer
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

This is what I have in my Lux
Image
From www.egauges.com
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

pyro

Post by vanbox »

ausyota, how much was your autometer gauge and did it include the probe? if not, how much extra? do www.egauges.com do online shopping?

cheers

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 293
Joined: Wed Oct 29, 2003 5:32 pm
Location: sydney (penrith)

Post by ROCKMUTT »

does anyone know of a brand of pyro gauge that displays in electronic rather than a dial?
94 GQ ST LWB TD42 ,DTS turbo,3 inch exhaust,snorkel,dual batts,3 inch lift,30mm coil spacers,Warn 9000,ARB bar,33x12.5x15 MTz's on black sunnys
Posts: 108
Joined: Sun Sep 26, 2004 8:50 pm

Post by ads80 »

check these out, i have spoke to the people that sell them they sound like a great gauge, with adj temp warning
http://www.cruzpro.com/py30.html

hope to have one next week :lol:
Last edited by ads80 on Wed Apr 25, 2007 6:34 pm, edited 1 time in total.
80 series with chrome wheelnuts !!
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Re: pyro

Post by ausyota »

vanbox wrote:ausyota, how much was your autometer gauge and did it include the probe? if not, how much extra? do www.egauges.com do online shopping?

cheers

PAUL
Cant remember how much I paid as I bought a boost and an oil pressure at the same time.
But yeah did the transaction via Email with credit card.
They were a little anal with the security and got me to scan and email my drivers licence, but all went smoothly :)
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

I can get you probe kits, no issues
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

ROCKMUTT wrote:does anyone know of a brand of pyro gauge that displays in electronic rather than a dial?
I've been thinking about this and reckon something could be knocked together pretty easily, we use a lot of temp controllers at work (digital) which have the temp readout usually in green or red LED display, these can just give a reading from a K type or similar thermocouple or switch something on or off at preset temps, asked one of the sparkys and he said depending on the material of the thermocouple they'd easily handle 6-700 degrees plus...

heres something similar to what we use at work, couldn't find much info on the one ive got here at home, its a Carel PID controller, use it to control the temp of a pouch for a baby wallaby..

http://www.omega.com/prodinfo/temperatu ... llers.html
There are no stupid questions, but there are a LOT of inquisitive idiots
Posts: 293
Joined: Wed Oct 29, 2003 5:32 pm
Location: sydney (penrith)

Post by ROCKMUTT »

ads80 wrote:check these out, i have spoke to the people that sell them they sound like a great gauge, with adj temp warning
http://www.cruzpro.com/py30.html

hope to have one next week :lol:
ads80 that gauge looks awsome excatly what ive been looking for how much did it set u back?
94 GQ ST LWB TD42 ,DTS turbo,3 inch exhaust,snorkel,dual batts,3 inch lift,30mm coil spacers,Warn 9000,ARB bar,33x12.5x15 MTz's on black sunnys
Posts: 108
Joined: Sun Sep 26, 2004 8:50 pm

Post by ads80 »

about $400 depends on where u are. click on the dealers link and find the closest to u. i think the digital will be much more accurate and faster to respond. and with an alarm u dont have to look at it, just my 2c worth :lol:
80 series with chrome wheelnuts !!
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

HotFourOk wrote: If you can handle having a gauge with a black face... fair bit cheaper
VDO Pyrometer
That's a smoking deal on the VDO. I paid about 50% more and that was with a whopping discount.
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Patroler wrote:
ROCKMUTT wrote:does anyone know of a brand of pyro gauge that displays in electronic rather than a dial?
I've been thinking about this and reckon something could be knocked together pretty easily, we use a lot of temp controllers at work (digital) which have the temp readout usually in green or red LED display, these can just give a reading from a K type or similar thermocouple or switch something on or off at preset temps, asked one of the sparkys and he said depending on the material of the thermocouple they'd easily handle 6-700 degrees plus...

heres something similar to what we use at work, couldn't find much info on the one ive got here at home, its a Carel PID controller, use it to control the temp of a pouch for a baby wallaby..

http://www.omega.com/prodinfo/temperatu ... llers.html

I had the same idea, i can buy all the stuff straight from RS and do it all for about $180(i think)
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

ROCKMUTT wrote:does anyone know of a brand of pyro gauge that displays in electronic rather than a dial?
There are a lot of happy users of the thermoguard digital EGT/PYRO
http://www.thermoguard.com.au/index.html
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Re: pyrometer gauges?

Post by zagan »

I went to autobarn ages ago and asked about they the guy said $280 for a full pyro guage kit.

No idea what kind of guage it was though.

I've seen some US places selling digital ones that can display F or C single or dual display

Single can hold in memory the highest EGT temp with a button

Dual can have 2 pyro meters or second display shows the highest EGT temp recorded, and some will even record over a certain amount of time and you can play back the temp recording.

But these would be a bit of money like $300 $400 for a kit.
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

gauges

Post by vanbox »

a mate of mine bought a supposed kit from autobarn, it was about $280. and when it arrived it was JUST the gauge. and cost him another $240 for the probe. i ordered mine from egauges.com for US$140 (approx $168) including the probe, and its the exact gauge i want. they have them ALL, so i got a cpl of other ones too and they all match. excellent site, just hope the gauges turn up :roll:

thanks everyone

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 583
Joined: Sat Sep 24, 2005 7:38 pm
Location: Central West-NSW

Post by Vineboy »

Once you get the guage, where do you put the probe? And don't say in the exhaust, stupid. I mean, where, in the exhaust.
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

Vineboy wrote:Once you get the guage, where do you put the probe? And don't say in the exhaust, stupid. I mean, where, in the exhaust.
As close as possible to the exhaust ports.
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

Vineboy wrote:Once you get the guage, where do you put the probe? And don't say in the exhaust, stupid. I mean, where, in the exhaust.
Read the information on the thermoguard page..

Ideally it should be upstream of your turbo, however in the dump pipe is acceptable downstream from the turbo. If your dump pipe doesnt have a fitting in it for place thr probe (unless it is aftermarket it probably wont) you can either drill and tap a hole yourself and get a workshop to do it for you.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

pyro

Post by vanbox »

i heard it was better pre turbo, as it would be more accurate as to how hot ur engine is running. i will be tuning my motor to EGT's and hear the recommended SAFE max is about 550C (correct me if im wrong please?????). would that be read pre or post turbo. got my gauges coming next week.

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Re: pyro

Post by +dj_hansen+ »

vanbox wrote:i heard it was better pre turbo, as it would be more accurate as to how hot ur engine is running. i will be tuning my motor to EGT's and hear the recommended SAFE max is about 550C (correct me if im wrong please?????). would that be read pre or post turbo. got my gauges coming next week.

PAUL
That temp would be post turbo, pre turbo its up around 700°C... there is no definate value for temperature loss between pre and post turbo, however reading OL/Thermoguard website would suggest it is about 200°C.

A post turbo EGT reading of 550°C would be on the high side of safe, good for lots of power, bad for longevity and fuel consumption.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Re: pyro

Post by KiwiBacon »

vanbox wrote:i heard it was better pre turbo, as it would be more accurate as to how hot ur engine is running. i will be tuning my motor to EGT's and hear the recommended SAFE max is about 550C (correct me if im wrong please?????). would that be read pre or post turbo. got my gauges coming next week.

PAUL
Your personal safety factor will vary. But 800 deg is where things start to melt (like pistons).
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

pyro

Post by vanbox »

Your personal safety factor will vary. But 800 deg is where things start to melt (like pistons).

im guessing thats pre turbo, sounds a lil scary for post?

so im guessing there there is no right or wrong for where the pyro is (pre or post) just that max temp post turbo should not exceed about 550C am i right?


PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

Vineboy wrote:Once you get the guage, where do you put the probe? And don't say in the exhaust, stupid. I mean, where, in the exhaust.
Be the extractors/ pipes coming out of the engine then into the turbo.

Look over for a bold hole or something, I think most extractors actuaully have a hole specially for a pyro probe, but alas some don't and you would need to drill in then tap the hole then screw probe into the hole.

check the threads etc before buying a pryo probe as you'd want it to simply screw in rather than buy one doesn't fit or stuffs up the thread etc.
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

zagan wrote:
Vineboy wrote:Once you get the guage, where do you put the probe? And don't say in the exhaust, stupid. I mean, where, in the exhaust.
Be the extractors/ pipes coming out of the engine then into the turbo.

Look over for a bold hole or something, I think most extractors actuaully have a hole specially for a pyro probe, but alas some don't and you would need to drill in then tap the hole then screw probe into the hole.

check the threads etc before buying a pryo probe as you'd want it to simply screw in rather than buy one doesn't fit or stuffs up the thread etc.
Most use swagelock type compression olive fittings with BSP threads.
Just make sure you get a steel fitting, brass loses it's strength at exhaust temps and lets go of your probe.
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

pyro

Post by vanbox »

Most use swagelock type compression olive fittings with BSP threads.
Just make sure you get a steel fitting, brass loses it's strength at exhaust temps and lets go of your probe.
does that still require a thread in the exhaust? or just a hole with compressions type fittings? where would i get them from?

so there is no right or wrong place to put the probe? just that closer to the motor will give a higher reading. but then what would be the max safe temp pre turbo and post turbo?

paul
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Re: pyro

Post by KiwiBacon »

vanbox wrote:
Most use swagelock type compression olive fittings with BSP threads.
Just make sure you get a steel fitting, brass loses it's strength at exhaust temps and lets go of your probe.
does that still require a thread in the exhaust? or just a hole with compressions type fittings? where would i get them from?

so there is no right or wrong place to put the probe? just that closer to the motor will give a higher reading. but then what would be the max safe temp pre turbo and post turbo?

paul
Yes these require a pipe thread to be drilled and tapped into the exhaust manifold.
My VDO gauge needs a 1/4 inch BSP hole and thread. The kit came with a prethreaded socket that can be welded to your manifold (if steel) and then drilled through.

Yes closest to the exhaust port is best, but anywhere pre-turbo is fine.
For me 750 deg C is the sane limit.
Post turbo is a guessing game, the temp drop across the turbo depends on many factors and can't be accurately predicted.
200 deg C drop is probably at the high end which makes 550 deg C a safe bet.
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

pyro

Post by vanbox »

i should have clarified because i only just realised this is in genral rather than make specific. i have a turbo diesel 4.2L patrol. non intercooled (at this stage). would 750C still be safe? higher or lower?

im going on your advice kiwibacon and will install it pre turbo. its an autometer gauge and hasnt arrived as yet. have a steel manifold so hopefully will be easy. in the dump pipe there are already some threded holes (with bungs in them) which would make it really easy. but im sure not everything is meant to be.


PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Just been for a drive in my GQ after turboing it and installing the pyro, I've got a VDO pyro, works fantastic, it is installed preturbo. I wasn't giving it much throttle and it isn't tuned properly yet but the pyro was getting up round 500 going up a fairly long hard hill, very happy with the pyro set up.
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

I just odered two set of "Mr Gasket" pyrometer and boost gauges(2 1/16th) from the states, they are made by autometer and are the lunar series, just instead of saying "LUNAR" they say "MR GASKET"

All fittings inc probes and wiring to my door $228
Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests