Hi,
I just acquired a second hand Warn M8000 D1 winch.
All F1, F2, A and +ve and -ve leads run to their respective locations, but when I try to run the winch, nothing happens.
I have concluded the winch drum seems ok as it free spools freely,
I cant even hear a click coming from the solenoid box when I apply power.
What trouble shooting steps can I take to figure out whats wrong.
I have tried to search for relevent information but im not striking any gold.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Warn M8000 Winch Trouble Shooting
Moderator: -Scott-
http://www.outerlimits4x4.com/viewtopic ... ight=winch
i just found this topic.
When I first connected the wire to the armiture 'A', the stud was loose.
Could this be the cause of the problem? As the wire inside the housing may have shorted.
i just found this topic.
When I first connected the wire to the armiture 'A', the stud was loose.
Could this be the cause of the problem? As the wire inside the housing may have shorted.
Who is online
Users browsing this forum: No registered users and 8 guests