Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Toyota 3L head issue

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 16
Joined: Wed May 31, 2006 8:19 pm
Location: Carrum Downs

Toyota 3L head issue

Post by BroRunner »

Will a 2.4 surf head fit to a 2.8 (3L) block,
have been told they do but not sure,
not too sure if it was 2LT or 2LTE,
but any info would be helpfull.
Cheers, Ryan
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

I beleive they do but why not use the 3L head, they are the replacement for a stuffed 2LTE head.
Just bolt your gear (turbo, etc.) to it.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Use a 3L head. The Early 2Lt head wont fit at all and is identifyable by adjustable rockers as oposed to buckets and shims on the late model 2LT. The late model head on both the 2Lt and the 2LTE will fit but i wouldnt use one they are a poor designe and are prone to cracking as they have an extra internal cooling galery in them to try and keep a little cooler with the turbo. This makes them weak and crack easy. Although the 3L head also cracks its not as common a problem.
The Late 2L non turbo fitted to 10/88+ 2wd hilux's and Hiaces will also work with the 3L.
Posts: 16
Joined: Wed May 31, 2006 8:19 pm
Location: Carrum Downs

Post by BroRunner »

Thanks for your replies. I'll try and get a 3L head now,
the only reason I asked about the surf head was that
I got one offered to me for a reasonable price with complete
turbo kit so I thought I would check fitment, I might try and
get the turbo kit only and get a 3L head instead.
Cheers fellas.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest