Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

warn high mount question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

warn high mount question

Post by mav »

hi, i just pulled apart my warn high mount brake assembly and the friction plates are shagged and there were no ball bearings in there, does anyone know the size of the ball bearings ??? and what are the clutch plates worth.
see ya mav
Top
Posts: 98
Joined: Sat Jul 12, 2003 9:28 pm
Location: victoria

Post by 60serius »

The brake overhall kit is about $140 from ARB
Top
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

brake kit

Post by mav »

rang ateco and got a brake overhaul kit for $120. :D :D :D
see ya mav
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

pulled my high mount down again today as it wont free spool the only thing that looked out of place was that the free ball bearings seemed to have jammed up dose anyone no if you can get the balls in a cage so that they have to stay in postion
Top
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

Post by mav »

duncan wrote:pulled my high mount down again today as it wont free spool the only thing that looked out of place was that the free ball bearings seemed to have jammed up dose anyone no if you can get the balls in a cage so that they have to stay in postion


try the pirate 4x4 site the have a good article on rebuilding them the use grease to hold all the balls in place.
see ya mav
Top
User avatar
ToNkA
The Haggler!
Posts: 6652
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

Winch Rebuild Pirate 4x4

Winch Rebuild Other With Wiring and Schematic Diagrams

High Mount Modifications

In Cab Wiring
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest