Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

To go 5" or 7"? Your invaluable thoughts please

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply

To go with the 5" or the 7" lift?


5"
26
79%
7"
7
21%
 
Total votes: 33

Posts: 10
Joined: Wed Sep 28, 2005 3:53 pm
Location: Tassie/Sydney

To go 5" or 7"? Your invaluable thoughts please

Post by ben85n »

Im just after everyones opinion on what size lift i should go. Its between 5" or 7" utilising tough dog big bores, mega lift coils (probably) and snake dropped radius arms all to suit the lift. As well as all the other gear that comes along with doing it.

Its for a lwb GQ, that has no bodylift, that will only be used as a weekend toy and eventually do a few comps. It will also be getting X-linked not to long after the lift. It will probably be running 37's although maybe 35's. All the gaurds will be trimmed as needed.

So i would just like peoples opinions what they would do, which lift?

And is there a better coil to use than the megalift ones snake sell?

Anything is much apreciated,
cheers Ben
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

5" and trim the hell out of the guards and fit some 37's and twin lockers :D :armsup:

No need for 7" if u wanna give it a try to fit big tyres..

Just my oppion..

Rick.
Posts: 10
Joined: Wed Sep 28, 2005 3:53 pm
Location: Tassie/Sydney

Post by ben85n »

Yeah im pretty sure it'll be running 37's most of the time....

The gaurds will be getting sliced as much as they need to be or is possible anyways...

Im probably leaning towards the 5" becaue of the lower COG. But wouldn't mind the extra 2" of travel from the 7".

Another thought i had, would it be wise to go a 7" lift and then try and get a hold of some pretty soft coils that would settle down probably 2" and give me the benefit of good travel. It doesn't matter how it drives on the black stuff....
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

ben85n wrote:Yeah im pretty sure it'll be running 37's most of the time....

The gaurds will be getting sliced as much as they need to be or is possible anyways...

Im probably leaning towards the 5" becaue of the lower COG. But wouldn't mind the extra 2" of travel from the 7".

Another thought i had, would it be wise to go a 7" lift and then try and get a hold of some pretty soft coils that would settle down probably 2" and give me the benefit of good travel. It doesn't matter how it drives on the black stuff....
Why don't u get coilovers? Or get 7" or longer shocks and 5" springs and retain the springs in u have low COG and heaps of travel..

ZOOK60 has done that go his springs clamped or welded in not sure and long a$$ shocks and his MWB flex's very well..

Rick
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

I had 7-8 dropped to 4 now 5". would not go to 7 again. too high, unstable, feels floaty. 5" Is perfect
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

bru21 wrote:I had 7-8 dropped to 4 now 5". would not go to 7 again. too high, unstable, feels floaty. 5" Is perfect
x2, but stayed 4... you should go 4inch and if need be, go a body lift.

Dave T's dad has q78s on a lwb with 3inch lift, and a bit of grinding if I remember... you dont need mass lift unless your crusing Chapel st.
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

Mulisha wrote:
ben85n wrote:Yeah im pretty sure it'll be running 37's most of the time....

The gaurds will be getting sliced as much as they need to be or is possible anyways...

Im probably leaning towards the 5" becaue of the lower COG. But wouldn't mind the extra 2" of travel from the 7".

Another thought i had, would it be wise to go a 7" lift and then try and get a hold of some pretty soft coils that would settle down probably 2" and give me the benefit of good travel. It doesn't matter how it drives on the black stuff....
Why don't u get coilovers? Or get 7" or longer shocks and 5" springs and retain the springs in u have low COG and heaps of travel..

ZOOK60 has done that go his springs clamped or welded in not sure and long a$$ shocks and his MWB flex's very well..

Rick
Yes my springs are retained but the shocks are only 8" travel its just the way they are mounted that i get more working length out of them.
I would go 5" if it is for a wagon or 4" for a swb
P.E.T.A
People eating tasty animals.
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

4" and angle grinder
GQ with big nuts
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

i say go 5 and reposition shouck mounts to maximise wheel travel, and retain springs,
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Does anyone have pics of this repostioned shock mount??

THanks

Rick.
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

The mounts have been cut off left moved to right side right to left etc .....has also been shortened (not the best pic some1 may have some close ups ....it was years ago I done this


Image

I also modified my uppers .... ...one of the reasons was to get the driver/pass shocks at the same angle and to get the lower mounts as high as possible and still use all the shock travel
Image
[b][i] DAN [/i] [/b]


:silly:
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

My GQ lwb has 37" Creepy's, and 2" bodylift, and 2" springlift, and 1" spacers. The springs have sagged a little now, but I trimmed the corners of the wheelarches, and it is fine. I fitted 1" spacers to the front shoch towers, to use longer shocks in the front, for extra droop.

With a full 4 or 5" lift, you may need to trim more, as your suspension will move a lot more than mine.

I wouldn't want to go any higher in mine, if anything, I may take the coil spacers out, and bring it a bit lower.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 10
Joined: Wed Sep 28, 2005 3:53 pm
Location: Tassie/Sydney

Post by ben85n »

Cheers for everyones comments.

Im pretty much decided that im going to go for 5" and if need be throw my coil spacers in as well.

Ill also move the shock mounts as suggested and more than likely retain the Coils as also suggested (top and bottom?).

Im no afraid to get friendly with the old angle grinder to make the 37's fit..... :twisted:

This will also men the X-link will be able to go in earlier too..... Should be good :lol:
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

definately retain the coils top and bottom, well my opinion anyway, i have done mine that way, and love it, i wasnt a fan of only retaining one end,

but each to their own,
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

bogged wrote:
bru21 wrote:I had 7-8 dropped to 4 now 5". would not go to 7 again. too high, unstable, feels floaty. 5" Is perfect
x2, but stayed 4... you should go 4inch and if need be, go a body lift.

Dave T's dad has q78s on a lwb with 3inch lift, and a bit of grinding if I remember... you dont need mass lift unless your crusing Chapel st.
Still running the same Bruce, And I only have 4" coils and a bit of trimming and run 36" Pedes.

Dave
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

ozy1 wrote:i say go 5 and reposition shouck mounts to maximise wheel travel, and retain springs,
How are the shocks mounted to increase Wheel travel. As some of the ways I have seen it done, make the car a flopy POS. The way I have seen is mounting the top of the shock close to the center line of the car. But this does not really allow the shock to do its job unless you had a really stiff shock.
THOUGHT FOR THE DAY....
Posts: 10
Joined: Wed Sep 28, 2005 3:53 pm
Location: Tassie/Sydney

Post by ben85n »

I was going to reposition them to just give extra diff clearance under the back diff...

I will just get longer shocks to give it more travel......
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

turps wrote:
ozy1 wrote:i say go 5 and reposition shouck mounts to maximise wheel travel, and retain springs,
How are the shocks mounted to increase Wheel travel. As some of the ways I have seen it done, make the car a flopy POS. The way I have seen is mounting the top of the shock close to the center line of the car. But this does not really allow the shock to do its job unless you had a really stiff shock.
like you said it all comes down to what shocks you choose, prob with really long shocks under a wagon is standard location gives no up travel, or if you wanna move mounts they will end up in tha cab,
i say, slant them in as much as you can and use a quality shock to dampen your ride,

ive slanted mine in as much as i can and it is great, but in sayin that mine is a ute, so its lighter than a wagon but i like my setup,
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

leave shocks std posisition n drop bump stops to run longer shocks, this has all been covered before in the last 2 months
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

you do not need any lift to fit 37's (If you have a wagon the rear will be a prob). Lifting more than you need to clear tyres is silly. If you need 5" all good. remember 5" starts to look pretty illegal!
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests