Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rim offset

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 50
Joined: Sun Apr 09, 2006 5:53 pm
Location: nsw

rim offset

Post by Bigger-benny »

I have a 80 series and a 86 lux and wanted to swap rims and tyres over but the cruiser rims rub on the lux brake calipers.Does anyone know what offset the landcruisers are and would some wheel spacers fix the problem i am sorry if this is a dumb question but i am not sure.
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Thought cruiser had more offset if they aren't touching by much maybe shave the callipers a bit.
plenty of parts on the bench
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

eh
Posts: 249
Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland

Post by balzackracing »

3 and 5/8 inch i think.
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Posts: 405
Joined: Tue Feb 08, 2005 1:35 pm
Location: East Kurrajong NSW

Re: rim offset

Post by CV Smasher »

Bigger-benny wrote:I have a 80 series and a 86 lux and wanted to swap rims and tyres over but the cruiser rims rub on the lux brake calipers.Does anyone know what offset the landcruisers are and would some wheel spacers fix the problem i am sorry if this is a dumb question but i am not sure.
Some small wheel spacers will do the trick, you should be able to get them at most mag wheel and tyre places.
Posts: 50
Joined: Sun Apr 09, 2006 5:53 pm
Location: nsw

Post by Bigger-benny »

thankyou fellas exactly what i needed to know i will get the wheel spacers and i think i will still have to take a fraction off th calliper as it only rubs on the top corner of the caliper. :BIG:
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Why not try and shave the callipers first as it could save you some $
plenty of parts on the bench
Posts: 259
Joined: Fri Sep 10, 2004 11:32 am
Location: Brisbane

Post by Clown Boy »

and wheel spacers are illegal
Transport Engineering and Trucking Services
Archerfield Brisbane
Call Simon on 0407 628 191 and say Clown Boy sent you

He will look after your rig, trailer or fleet.
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

Clown Boy wrote:and wheel spacers are illegal
depends what state ur in
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Z()LTAN wrote:
Clown Boy wrote:and wheel spacers are illegal
depends what state ur in
Any state or territory in Aus unless they were factory fitted.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Thats what i thought about spacers wonder what the deal is with grinding callipers but i've herd about it being done a bit.
plenty of parts on the bench
Posts: 107
Joined: Tue Jul 05, 2005 9:06 pm
Location: BrisVegas

Post by juscruisin »

Clown Boy wrote:and wheel spacers are illegal
As is shaving calipers.....
Rockhammer Racing
www.rockhammerracing.com has left the building
Get Hammered!!
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Yeah my thought's were that would be the case. my advise do a good job and make it look as factory as possable :bad-words: DOT
plenty of parts on the bench
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests