Warn XD9000 wiring

Post by **turps** » Wed Oct 15, 2003 1:39 pm

Mate has a warn xd9000 winch that he is fitting to a newish hilux and needs a wiring diagram. If anyone has a copy of one can they post it here or email it to me at carl.turpie@defence.gov.au that would be great.

Turps

Post by **spazbot** » Wed Oct 15, 2003 1:47 pm

+ goes to the + on the battery and - goes to - on the battery , or you want the diagram for the solenoid box to the motor?
i can scan the page from the manual tonight if i can find it

Post by **turps** » Thu Oct 16, 2003 2:47 pm

There is three cables coming out of the control box, need to know where these go. Realising that one will be power in then there will be 2 out. 1 forwards other reverse.

As for the winch it would only have a earth (straight to Batt), then the forwards and reverse cables is this correct.

Turps
Got a PTO myself, so no wires, also winch is not here for me to look at.

Post by **spazbot** » Thu Oct 16, 2003 3:48 pm

they should be color coded, on the top of each pin on the motor it should have a color like blue etc, if you pull the rubber cover back on the cable there should also be a blue sticker, match them up, ill scan the xd9000 manual tonight

Post by **Ruggers** » Thu Oct 16, 2003 6:29 pm

mine had letters like a, b ,c c and ive open the box and they had the corosponding letters on the other end of the cable. these letters where stamp into the casing

Post by **turps** » Fri Oct 17, 2003 6:44 pm

Thanks for the reply's I think he has worked it out now.

Outer Limits 4x4 Board

Warn XD9000 wiring

Warn XD9000 wiring

Who is online