hey just wondering if any one has put 5L holden motor in ute or troppie or even middy as i am looking to do it and am wondering about cost and adaptors and so forth any one with info would be great
cheers boy-c
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
5L efi in 75
Moderators: toaddog, Elmo, DUDELUX
5L efi in 75
2 inch body 2 inch spring 37's high mount winch bar no winch yet 4.6 gears in rear and front 2 limos no lockers
hey, a few people on this board have efi 304's in there 75's i have the older 308 carbie in mine and it seems to be a great match powerfull and torquey down low. ur main problem will be wiring up ur efi unles u know ur wires.
if u r purchasing the motor make sure to get the lume and computer with it maybe even the A/C compresore aswell.
there are a few places that sell adapeters search google for , marks adapters, dellows adapters ?
and i think balmain rod shop can anyone confirm that last one?
remember that if ur cruiser is post 1990 build it will have a diferent gearbox so it's important u remember that when chosing an adapter.
hope that helps.
if u r purchasing the motor make sure to get the lume and computer with it maybe even the A/C compresore aswell.
there are a few places that sell adapeters search google for , marks adapters, dellows adapters ?
and i think balmain rod shop can anyone confirm that last one?
remember that if ur cruiser is post 1990 build it will have a diferent gearbox so it's important u remember that when chosing an adapter.
hope that helps.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .
86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
yes its called catlemain rod shop (rod hadfield), i have both a 5ltr in a middy and 1uz in a middy, the gm motor is mated to a turbo 700 into a gq transfer, the other being the 1uz is mated to a h55f 5speed and vacume transfer with 55%reductionn gears (low range only)
Ben
Ben
BIGGER THE PROBLEM, BIGGER THE HAMMER.
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
YOTABITS RACE TEAM PROUDLY SPONSORED BY BUILDERSEDGE P/L, COCKATOO CANVAS, AMERICAN VEHICLE SALES, YOTABITS.COM
There was a thread very recently about the 5L into the middy. If there's a problem you can have, I've had it so if you've still got specific questions when you're done searching, I can probably shed some light
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Who is online
Users browsing this forum: No registered users and 1 guest