Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gq steering box onto lux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

gq steering box onto lux

Post by Guy »

Is it worthwhile fitting up a GQ power steer box to a hilux ( as IFS yota boxes seem to be hard to get and kinda expensive)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Anyone ?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

never herd of them being hard to get up here you exchange the old style (push pull) to the ifs for even swap and why go nissan when it'll only hold you back :rofl: and threads may be differant.
plenty of parts on the bench
Top
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Post by Tuflux308 »

depends what you are doing, i have gq steering box in mine, was easy to fit, shortened steering shaft and used gq yoke for the steering box.. i have coiled gq front diff, so used the gq drag link also, this is where you may run into troubles, is this for hi-steer??
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Not nessicarily for high steer, but at least crossover like using one of the ORI cast Y arms
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

try asking the wreakers if they will swap your old one for a ifs as there ain't as many of the older style ones around and heaps of ifs ones.
plenty of parts on the bench
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

80 series? same spline on the steering shaft and usually cheaper than ifs, with the added bonus of forward facing pitman arm.
Yurich Design Services
www.yds.net.au
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Sic Lux wrote:try asking the wreakers if they will swap your old one for a ifs as there ain't as many of the older style ones around and heaps of ifs ones.
My current unit is non ps .. I have decided if I am going to upgrade I may as well go all the way and ditch the push pull setup as well as the torque rod thingy (I would like to do rears up front etc as well to help clear 33's or 35 etc etc)
It appears to be cheaper and better to do it that way than pay for a new torque rod, drop arm and still have the wimpy J Arm etc on the stock steering.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

yeah and still bind up on flat u bolts and also my Jarm is about to break (bent in all kinds of ways) so my job sunday is to mount up ifs box and fit all the stuff i have. :armsup: :armsup: Xover :armsup: :armsup:
RUF should clear 33's E Z. 35's may just touch so drill perches
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests