Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Jack TD3.0 injectors and vibrations

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 63
Joined: Tue Aug 26, 2003 10:38 am
Location: Melbourne

Jack TD3.0 injectors and vibrations

Post by glenxr650 »

Hello good people,

It is well know about early TD3.0 injector seal problems and warranty issues, but can someone tell me if the replacement injector seals are a permanent fix? Another Jack owner said he replaced his seals 3 times (under warranty) before the engine blew up at 100,000kms.

How long will these engines last? What is the correct way to rectify the problem? BTW the vehicle in question is my mates '98 model and is blowing all sorts of stuff out the exhaust.

Also the engine has developed a vibration at 2100rpm. This has happend recently and is not drive train vibrations. The only thing I can think of is alternater bearings, harmonic balancer or waterpump. Any clues?
Posts: 52
Joined: Fri Jan 03, 2003 3:01 pm
Location: Sydney

Post by JohnJohn »

To see if the altenator or water punp is causing the vibration disconect the belts and take it for a short drive.

For a wild guess I would suspect a dirty or missfiring injector.
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

Here is some injector info for you from the Overlander forum.

http://forums.overlander.com.au/viewtopic.php?t=9941

Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
Posts: 71
Joined: Tue Mar 09, 2004 7:38 pm
Location: COFFS HARBOUR

Post by DAAS KAPITAL »

A mate of mine has the recalled 3lt TD & had the injectors done 3 times, things have been ok but now he has diesel getting into the coolent system Holden claim it is a head gasket but how is the fuel getting there & on a 90 000km motor???? anyone have any ideas (talk about a Holden lemon)
better than a bought one.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Recall was for injector sleeves leaking, allowing fuel into crank case and causeing engine to behave strange, sluggish and then blow up. Whenever a jack goes to a holden dealer they are sposed to check if the recall applies to it, then carry it out. If ya worried about ya trucks requireing it then call the holden dealership and they should check for ya. The rework is a saftey issue too as it can cause the engine to rev out of control.
layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests