how much oil should go in a H233 front diff and a H260 rear diff.
When the rear was drained it was filled to the filler bung so all i need is confirmation this is correct.
The front was about 1-1.5 inch below the filler, i was told this is probably the correct amount as the filler is higher than required. I was also told if i put too much in it will drain out the axles seals. Can anyone confirm this???
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diff Oil Capacities
mq
You should fill to the bottom of the filler plug
Remember some days your the pigeon and other days your the statue
excellent, that will be why it was showing low. Do you knwo the capacity in Litres. now when i put them back in the castor should be correct (hope these arms are right) then should i just fill it to the plug?Fozdick wrote:If the angle of your diff is not factory (castor or pinion angle at rear) then the fill level will be wrong.
i usually squeese a bit more in to allow for this.
Who is online
Users browsing this forum: No registered users and 150 guests