Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Defender Centre Diff

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 47
Joined: Thu Mar 23, 2006 10:18 am
Location: Warragul

Defender Centre Diff

Post by mike_beecham »

In process of replacing the release lever (and clutch while l am at it) in my Defender 200 after it punched a hole through itself in the High Country 2 weeks back leaving me strandard so to speak!

But, while l have the lot out, l noticed that the centre diff has about a 1/8th of a turn of slack in it.

Is this an acceptable amount of slack in the centre diff or what? Is there anything l can do in terms of tightening it up tolerances wise or ????? just leave it??



Mike
_______________________________________
2006 Defender TD5
No oil leaks
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

I would say that if the diff is not making any strange noises, and the pinion nut is tight, then leave it alone. Adjustment will require the diff to be dismantled and rebuilt, ie, the backlash will require adjustment, and this should really be done with new carrfier and pinion bearings etc.
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Reddo wrote:I would say that if the diff is not making any strange noises, and the pinion nut is tight, then leave it alone. Adjustment will require the diff to be dismantled and rebuilt, ie, the backlash will require adjustment, and this should really be done with new carrfier and pinion bearings etc.
:? He's talking centre diff, not front or rear......pinion nut on CD :roll:
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 47
Joined: Thu Mar 23, 2006 10:18 am
Location: Warragul

Post by mike_beecham »

So what are oyur thoughts Cloughy????


Leave it be or mess with it????


Mike
_______________________________________
2006 Defender TD5
No oil leaks
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

oops, too much red wine.....

...centre diff......diff centre....easy mistake:)
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

How much play does it have when it is locked?
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 47
Joined: Thu Mar 23, 2006 10:18 am
Location: Warragul

Post by mike_beecham »

Not really sure as i only looked at it once i had dismantled everything....including the lever....


Mike
_______________________________________
2006 Defender TD5
No oil leaks
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Split the centre diff and inspect it for wear, if either the thrust washers are cactus or the cross pins, replace as needed

How "clunky" was it to drive before hand, if you were happy with it, i'd just do a visual to make sure nothing is gonna bite you on the rectum, and return it to service
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 3 guests