Hey,
thinking i got a clutch prob here but not sure.
new HD clutch, pressure plate ,bearing and flywheel skimmed. the motor is a G16ab mpfi,sierra box with BenT adapter between it.
When the engine is started up, clutch cable is not connected up. (was before) it squeels a little bit but when u press fork in about 1/2 way is grinds/squeels.
any ideas on this one. the fork moves ok and returns back to position after moved. starts up ok and rear shaft is moving whilst engine is on even thou in N in gearbox (was guessing this is no load so spins?) or something wrong here.
Nic
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
clutch woes ?
clutch woes ?
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Anyone got some wild ideas.
Think i am going to continue on doing the wiring and brakes and look at the gearbox clutch side of things last.
grr, i hate pulln them out.
ps anybody got any pics of where u put the notch in the crossmember to pull box out.
Nic
Think i am going to continue on doing the wiring and brakes and look at the gearbox clutch side of things last.
grr, i hate pulln them out.
ps anybody got any pics of where u put the notch in the crossmember to pull box out.
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Have you got the splash plate installed that covers the bottom of the bellhousing/flywheel?
I'd check that first, as it can sometimes touch the bottom of the ring gear and make a squealing / grinding noise. Mine did when I first started the 1600, so I re-arranged it slightly with a BFH.
Otherwise I can only suggest the throwout bearing might be bung.
Ben
I'd check that first, as it can sometimes touch the bottom of the ring gear and make a squealing / grinding noise. Mine did when I first started the 1600, so I re-arranged it slightly with a BFH.
Otherwise I can only suggest the throwout bearing might be bung.
Ben
WWW.ZUKPARTS.COM - Quality Suzuki Off-road Parts - 1600 Adaptor kits - Vitara Power Steering adaptor kits - Disc brake kits - Heavy Duty Transfer case arms & more
Yes and yes.
it was the culprit. took it off as was going to anyway to have a look in there and no noise when running so bfh coming out to play again.
cheers ben
Nic
it was the culprit. took it off as was going to anyway to have a look in there and no noise when running so bfh coming out to play again.
cheers ben
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 3 guests