Guys just after some opinions on a PTO winch for the GQ.
is it worth the trouble or should i look at a different type of thing?
are the easy to fit or are there things i need to keep in mind?
will it fit in my lowmount TJM winch bar or does it need a new front bar like the imports?
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ PTO
GQ PTO
www.mudrhino.com.au
I think you can mod the bar to suit, but the ARB bars are much easier to mod.
If you use factory mounts, the winch is like a grade blade, you really need a body lift so the winch can be mounted higher and further back to improve approach angles, which requires the pto driveshaft to be cut to suit
Make sure your gearbox has the pto plate on it for the output, if it doesn't, you can't fit the pto to that gearbox.
If you use factory mounts, the winch is like a grade blade, you really need a body lift so the winch can be mounted higher and further back to improve approach angles, which requires the pto driveshaft to be cut to suit
Make sure your gearbox has the pto plate on it for the output, if it doesn't, you can't fit the pto to that gearbox.
Who is online
Users browsing this forum: No registered users and 1 guest