Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

alloy / poly fairlead where do i get one for reasonable $$$?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

alloy / poly fairlead where do i get one for reasonable $$$?

Post by bigcam »

I have been looking for an alloy or poly hawse fairlead for running with synth rope with the offset mounting holes. i.e. the mounting holes are about 3/4" below the centre line of the rope slot.

i have only seen a poly one at procomp for $120 :shock:

does anyone know who makes these, or whre i can get them for reasonable $$ i.e. <$100

there are heaps making the inline (i.e. hole slot hole all in line) but cant seem to find any ofset ones (apart from steel ones on ebay with only one radiused edge (hmm rope chop chop!!)

thanks fellas
cam
[quote="75 cruser"]we want more donkey[/quote]
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

Call Sean from ABT (mczook on here if you want to PM him), I know he has them.
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests