Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheel Bearing Adjustment for "96 Sierra Coilly

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 73
Joined: Thu Jul 03, 2003 9:02 am
Location: Australia, Gold Coast QLD

Wheel Bearing Adjustment for "96 Sierra Coilly

Post by Sirzooky »

Hi guys,

Just writing to see if anyone knows how to adjust the Front wheel bearings on my coilly sierra. I have pulled off the retainer and removed the screws, there are four holes that look like a special tool is needed. Had tried to move with a hole punch but is not moving. Any ideas?

CHeers

Sadiq

PS- anyone have the tool? know where to go on the GC? need to do it asap. will pay in beers!
Ando
Have
"07 Mazda BT-50
Offset rims, tints + UHF
Had
"96 Coil Sprung Sierra
31s on Offset 15x7s
2" spring lift + 2" BL
Top
Posts: 73
Joined: Thu Jul 03, 2003 9:02 am
Location: Australia, Gold Coast QLD

Post by Sirzooky »

bump need help!!!!!!
Ando
Have
"07 Mazda BT-50
Offset rims, tints + UHF
Had
"96 Coil Sprung Sierra
31s on Offset 15x7s
2" spring lift + 2" BL
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

coily bearings

Post by want33s »

www.suzukiinfo.com should have what you need.
http://www.suzukiinfo.com/sierra/zukboyshaynes.zip
Top
Posts: 121
Joined: Fri Jul 28, 2006 10:17 pm
Location: Riverton

Post by rosie »

Yeah mate, I'm having the same trouble with my Vit and apparently I need a soecial socket and a big bar to tighten it.

Might try coventries or Blackwoods and will let you know how I get on.

Ben
Donning the Zook called Tara
Top
Posts: 105
Joined: Wed Jul 09, 2003 9:43 pm
Location: newcastle

Post by PAZZ »

i just used a punch and a hammer! it worked..
chicks dig panel damage
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

sadiq i know ive been talking to you about this but i see another reply further down..


just in case you didnt know when you pull the screws out you need to take off that retainer (if your hitting this with the punch it will never move), behind that is the adjuster... it should move with a punch or you seriously have problems..


sadiq how did you go? sorry i didnt reply to your last sms i ran out of credit..
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 73
Joined: Thu Jul 03, 2003 9:02 am
Location: Australia, Gold Coast QLD

Post by Sirzooky »

Hi guys, hi mark,

Got it sorted. My bearings were unable to be adjusted. Bought and fitted new ones. Just belted the thing with a punch and hammer. no worries cam undone straight away. Thanks heaps mark for your time otherwise i would have been at suzuki or something and got my pants pulled down.

Cheers

Sadiq
Ando
Have
"07 Mazda BT-50
Offset rims, tints + UHF
Had
"96 Coil Sprung Sierra
31s on Offset 15x7s
2" spring lift + 2" BL
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 4 guests