Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
was going to put my motor in today then deceided that i would be better of putting in a new clutch whilst it was off, has anyone done this and if so which sort did u use Im thinking of using a daikin clutch but i also run into the problem were as i dont know if the clutch is a toyota or holden one. I beleive that the pressure plate would have to be holden but dont know.Its a dellows belhousing but thats all i know and a supra box.any help would be appreiciated
Lockers or Knockers ,both will make for fun.
HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers
Im thinking of using a daikin clutch but i also run into the problem were as i dont know if the clutch is a toyota or holden one. I beleive that the pressure plate would have to be holden but dont know.Its a dellows belhousing but thats all i know and a supra box.any help would be appreiciated 
