Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need advice on 33" muddies

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 76
Joined: Wed May 09, 2007 5:58 pm
Location: sunshine coast, qld

need advice on 33" muddies

Post by stann_the_man »

hey ive got a set of second hand 33" bfg muddies and im just wondering if anyone knows if they will fit on a stock 85 swb pajero. i allready got 15x8 rims so i got rims for the tyres but ive been told by people they will fit but then ive been told they wont fit so im just wondering if anyone knows. thanks heaps
stann
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

best way to find out is stick em on there!
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 105
Joined: Fri Dec 29, 2006 7:20 am

Post by Trav83yo »

if they fit it will be tight and youl scrub going over speed bumps :?
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

I havn't seen 33" fit on many stock vehicles... let alone an old Paj.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Post by pridhac »

I have 33" MTR on my stock 80. It scrubs if I run over a 20c coin.

HTH
Top
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

tyres

Post by noelb1 »

put them on , see where they rub , if it is only a little bit bash trim body to suit , or if it is a little bit more than you can trim/hammer , if it is leaf springs get some ext shackles (2" shackle gives 1" lift might need some castor wedges if it spins the diff to far) and wind up the torsions at the front to suit or if it is coil get some lwb coils and wind up the torsions at the front (in a 90mod swb its roughly 1.5-2inch lift).

noel
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

i hav 33s on a stock mq, and my fronts occasionaly scrub when offroad with no swaybars... an old paj shouldnt be to much dif...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 76
Joined: Wed May 09, 2007 5:58 pm
Location: sunshine coast, qld

Post by stann_the_man »

hey thanks for the help guys but ive decided to do a 2'' body lift on it and then 2" shackles and some 1" spacer in the front and wind the torsion bars up a bit. then ill put my muddies on. thanks for the help
Top
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

paj

Post by noelb1 »

post up pics when she is done or start up a build up thread, it begins , this is how they all start ......
Top
Posts: 76
Joined: Wed May 09, 2007 5:58 pm
Location: sunshine coast, qld

Post by stann_the_man »

yer ill try to do my best to take some pictures while im doing it and get a before and after shot of it.
cheers,
stann
Top
Posts: 1419
Joined: Mon Apr 24, 2006 7:31 pm
Location: South Bris

tyres

Post by micks troll »

I have a mate running 32" mongrels on an older model jackaroo which is very similar in size and shape. He did a 2" body lift and a 3" Calmini kit and he still wouldnt be able to fit my swampers. depends on the offset of the rims too.
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
Top
Posts: 271
Joined: Mon Mar 13, 2006 7:13 pm
Location: Melbourne

Post by Shorti »

you can fit 35's on a gen1 paj with 2" bl and 2" sus
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests