front control arm spacers

Post by **bill** » Tue Oct 21, 2003 6:45 pm

where can i get front control arm spacers,wanting to move the diff foward about 25 mm

Post by **bogged** » Tue Oct 21, 2003 7:30 pm

Just get some round steel and drill a hole in it.

25mm is a big move, usually 15mm is around normal

Post by **Area54** » Tue Oct 21, 2003 7:38 pm

bogged wrote:Just get some round steel and drill a hole in it.

Bit more complex than that, you need to space the bush and the lock nut.

Binskins 4wd centre in Wauchope make a complete kit to move the front diff forward.

Post by **bill** » Tue Oct 21, 2003 7:48 pm

thanks ,i was going to make my own ,then i read you can buy these,just wanted to now where to ring,to see how much they are.

Post by **Wendle** » Wed Oct 22, 2003 1:02 pm

whereabouts are you? overkill do them in sydney...

Post by **Wendle** » Wed Oct 22, 2003 1:03 pm

you can only go about 12mm as well, or you run out of thread on the radius arm.

Post by **Drafty** » Wed Oct 22, 2003 7:02 pm

If in Vic we can machine a set up for you. The max you will get is about 12mm as wendle said.

Post by **bill** » Wed Oct 22, 2003 9:57 pm

Im in vic,was at boho on the weekend in the black shorty,how much they worth drafty? , and how long ago did you do origon track at the otways thinking of doing it in the next few weeks

Outer Limits 4x4 Board

front control arm spacers

front control arm spacers

Re: front control arm spacers

Re: front control arm spacers

Who is online