hey guys
im changing my front diff out this week (just the centre) in my 89 GQ SWB, is there any little tricks i need to look out for? i have my trusty (:roll:) gregorys manual.
but is it a straight take the axles out unbolt the diff, change the bearings,
bolt in the new diff, put in the axles, repack the bearings, and put it all back together. is it that simple?
any input would be greatly accepted as i dont have the money to pay someone to put it in for me. and wouldnt mind knowing myself.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
changing diffs for the first time
changing diffs for the first time
cars with alloy bullbars should be shot to the sun.
Yep thats it, piss easy, you might want to replace your axel seals while you have everything out. i put mine together with 'blue max' sealant.
if you intend on repacking your inner wheel bearing you will need new seals.
just lay everything out as you pull it off and you cant go wrong.
if you intend on repacking your inner wheel bearing you will need new seals.
just lay everything out as you pull it off and you cant go wrong.
innovation is better, better is faster, and fast is all that counts
Who is online
Users browsing this forum: No registered users and 0 guests